prof. dr hab. inż. Witold Gutkowski

Zakład Informatyki i Nauk Obliczeniowych (ZIiNO)
emeryt
telefon: (+48) 22 826 12 81 wew.: 192
pokój: 419
e-mail: wgutkow
strona www: http://bluebox.ippt.pan.pl/~wgutkow/

Doktorat
1961-05-21Statyka i stateczność pryzmatycznych powłok ramowo-kratowych 
promotor -- prof. dr hab. inż. Zbigniew Brzoska, PW
598 
Habilitacja
1965-06-24Powierzchniowe konstrukcje prętowe752
 
Profesura
1972Nadanie tytułu naukowego profesora
Inne
1976Członek korespondent Polskiej Akademii Nauk
1991Członek rzeczywisty Polskiej Akademii Nauk
2012Życie w ciekawych czasach, Witold Gutkowski - autobiografia

Promotor prac doktorskich
1.2007-03-12Misztela Andrzej  
(IMBiGS)
Nośność przyściennych rusztowań kotwionych 
2.2005-04-28Hołobut Paweł  Optymalne sterowanie w pozycjonowaniu wieloczłonowych urządzeń z napędem hydraulicznym 
3.2005Błachowski Bartłomiej  Optymalne sterowanie drganiami masztów z odciągami585
 
4.2002Latalski Jarosław  Tolerancje wykonania w optymalnym projektowaniu konstrukcji 
5.1989Pyrz Mariusz  Optymalizacja dyskretna konstrukcji prętowych przy uwzględnieniu warunków utraty stateczności 
6.1982-11-24Gawkowska Larysa  
(ZUT)
Optymalizacja przekryć strukturalnych 
7.1975Bauer Jacek  Analiza płyt o zadanej strukturze dyskretnej 
8.1972Obrębski Jan  Statyka heksagonalnych siatek prętowych 
9.1971-01-11Karpińska Halina  
(ZUT)
Drgania płyt i belek obciążonych ciężarami sztywnymi opartymi na sprężynach 
10.1970Orłowska Barbara  Makroskopowa teoria ośrodków złożonych o strukturze periodycznej 

Ostatnie publikacje
1.Błachowski B., Gutkowski W., Effect of damaged circular flange-bolted connections on behaviour of tall towers, modelled by multilevel substructuring, ENGINEERING STRUCTURES, ISSN: 0141-0296, DOI: 10.1016/j.engstruct.2015.12.018, Vol.111, pp.93-103, 2016

Streszczenie:

The paper deals with non-linear analysis of a telecommunication tower with circular flange-bolted connections (CFBCs). They are composed of two flanges, welded to the structural tubes, and then connected together with pre-tensioned bolts. A rigorous FEM analysis is performed for finding the connection stiffness in two cases. One deals with all bolts undamaged and the second one with one or more bolts broken.

The analysis, which includes contact and friction forces, shows that when joints are under tension, the bolts are not only subjected to axial forces, but also to bending moments due the prying effect. The value of stresses caused by bending depends strongly on the bolt pre-tension and flange thickness. Removing one of the six connection bolts significantly increases stresses in the remaining bolts. Knowing the behaviour of the connection, it is possible to study the behaviour of the whole structure. This is achieved by applying the multilevel substructuring approach. The first levels is related to the flanges and bolts, whereby the connection model is simplified, and compared with the rigorous one, the second level is related to the assembly of the whole tower.

The paper is illustrated with several examples of connections of different thicknesses, and different bolt pre-tensions. The considered tower comes from a real design.

Słowa kluczowe:

Bolted flange connection, Contact forces, Friction forces, Non-linear FEM analysis, Substructuring, Telecommunication tower, Structural connection damage, Structural health monitoring

Afiliacje autorów:

Błachowski B.-IPPT PAN
Gutkowski W.-other affiliation
35p.
2.Błachowski B., Świercz A., Gutkiewicz P., Szelążek J., Gutkowski W., Structural damage detectability using modal and ultrasonic approaches, MEASUREMENT, ISSN: 0263-2241, DOI: 10.1016/j.measurement.2016.02.033, Vol.85, pp.210-221, 2016

Streszczenie:

An experimental and analytical study of the relation between local defect, in a steel structure, and its higher frequencies and higher modes is discussed. The structure is a plane steel frame, assembled of beams, joined together with bolted connections. Removing some bolts from a given connection simulates the damage. In the experiment, an impulse force induced structural vibrations. Effects of vibrations were shown by data from gages, measuring accelerations with a high accuracy. From the data, it could be observed, that mode shapes, for the healthy and damaged structures didn’t show any differences for low frequencies. Only modes around thirteen showed significant gap between picks of Frequency Response Functions, for healthy and damaged frame. Moreover, looking at mode shapes, it could be observed that structural configuration may have some influence on defects to be observable. This aspect is discussed in a separate section. The experiment performed on the whole structure allows finding the place where the defect is localized. However, it can’t give detailed information on the defect itself, here defect of a bolt. For finding it, an ultrasonic measurement of pre-tensioning forces in bolts was applied. It allowed not only to determine stresses in the bolt, but also to verify, if in the process of assembling the structure was not pre-stressed.

Słowa kluczowe:

Detectable damages, Bolted connections, Experimental modal analysis, Ultrasonic measurements, Steel frames, Analytical dynamics

Afiliacje autorów:

Błachowski B.-IPPT PAN
Świercz A.-IPPT PAN
Gutkiewicz P.-IPPT PAN
Szelążek J.-IPPT PAN
Gutkowski W.-other affiliation
30p.
3.Błachowski B., Gutkowski W., Graph based discrete optimization in structural dynamics, BULLETIN OF THE POLISH ACADEMY OF SCIENCES: TECHNICAL SCIENCES, ISSN: 0239-7528, DOI: 10.2478/bpasts-2014-0011, Vol.62, No.1, pp.91-102, 2014

Streszczenie:

In this study, a relatively simple method of discrete structural optimization with dynamic loads is presented. It is based on a tree graph, representing discrete values of the structural weight. In practical design, the number of such values may be very large. This is because they are equal to the combination numbers, arising from numbers of structural members and prefabricated elements. The starting point of the method is the weight obtained from continuous optimization, which is assumed to be the lower bound of all possible discrete weights. Applying the graph, it is possible to find a set of weights close to the continuous solution. The smallest of these values, fulfilling constraints, is assumed to be the discrete minimum weight solution. Constraints can be imposed on stresses, displacements and accelerations. The short outline of the method is presented in Sec. 2. The idea of discrete structural optimization by means of graphs. The knowledge needed to apply the method is limited to the FEM and graph representation.

Słowa kluczowe:

discrete structural optimization, combinatorial optimization, structural dynamics, stochastic loading, problem oriented optimization, graphs

Afiliacje autorów:

Błachowski B.-IPPT PAN
Gutkowski W.-other affiliation
25p.
4.Błachowski B., Gutkowski W., Minimum weight design of composite floors under human induced vibrations, Journal of Civil Engineering, Environment and Architecture, ISSN: 2300-5130, DOI: 10.7862/rb.2014.25, Vol.XXXI, No.61, pp.5-14, 2014

Streszczenie:

The paper is concerned with a minimum weight design of composite floors subjected to dynamic loading, deriving from the rhythmic activity of a group of people. The floor structure consists of concrete slab cast, on thick trapezoidal deck, which is supported by a grid of steel beams. The structure is vibration-prone and exhibits a number of natural frequencies, which are within a range of loading function. Minimum weight design consists in assigning, from catalogues of prefabricated plates and beams appropriate elements assuring fulfillment of imposed constraints on displacements and accelerations. Applied, practical discrete optimization method is based on graph theory and finite element analysis. Efficiency of the proposed design is demonstrated in an example of real-world engineering structure.

Słowa kluczowe:

structural optimization, discrete optimization, structural vibrations, omposite floor structure

Afiliacje autorów:

Błachowski B.-IPPT PAN
Gutkowski W.-other affiliation
5p.
5.Błachowski B., Gutkowski W., A hybrid continuous-discrete approach to large discrete structural problem, STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, ISSN: 1615-147X, Vol.41, No.6, pp.965-977, 2010

Streszczenie:

Many optimum structural designs are based on searching for the best of all combinations, arising from the number of structural members, and parameters of listed rolled profiles. Even, in a relatively simple design, the number of such combinations is of an order higher than ten. All known methods of finding discrete minimum of structural weight require very large number of analyses often of an order of four. In this study, are relatively simple method of solving such problems is presented. It is based on a tree graph, representing discrete values of the structural volume. The structure can be subjected to multi static loadings with constraints imposed on displacements and stresses. The number of analyses, in the proposed algorithm, is limited to the order of two. The knowledge needed to apply the method is limited to FEM and graph representation. The paper is illustrated with two examples with numbers of combinations up to 42 to the power 38.

Słowa kluczowe:

Structural optimization, Problem oriented optimization, Discrete optimization, Combinatorial optimization, Graphs

Afiliacje autorów:

Błachowski B.-IPPT PAN
Gutkowski W.-other affiliation
32p.
6.Błachowski B.D., Gutkowski W., Discrete structural optimization by removing redundant material, ENGINEERING OPTIMIZATION, ISSN: 0305-215X, Vol.40, No.7, pp.685-694, 2008

Streszczenie:

A very simple method for finding the minimum weight of a structure designed from a list of available parameters is presented. The structure can be subjected to multiple loading conditions with constraints imposed on displacements, stresses and eigenfrequency. The method consists of a recursive removal of redundant material, starting from the heaviest structure. The number of analyses required is a factor of 10 to the power 2 less than for most stochastic methods. The knowledge needed for application of the method is limited to the finite-element method.

Słowa kluczowe:

structural optimization, combinatorial optimization, structural dynamics

Afiliacje autorów:

Błachowski B.D.-IPPT PAN
Gutkowski W.-other affiliation
7.Błachowski B., Gutkowski W., Dyskretna optymalizacja konstrukcji sterowana zmiennymi stanu, MODELOWANIE INŻYNIERSKIE, ISSN: 1896-771X, Vol.36, pp.27-34, 2008

Streszczenie:

A very simple discrete optimization algorithm for minimum structural weight is presented. The main idea consists in assigning initial cross-sections to a given structure, and then searching for its least stressed elements. In the second stage of the algorithm, the cross-section of the element with minimum stress is reduced to the next catalogue entry. Such reduction of cross-sections is continued until imposed bounds are met. The presented algorithm was positively tested on example configurations with complexity of 10 to the power 10 and 30 to the power 8 combinations.

Słowa kluczowe:

discrete optimization, truss structures

Afiliacje autorów:

Błachowski B.-IPPT PAN
Gutkowski W.-other affiliation
8.Gutkowski W., Płaskie regularne konstrukcje prętowe, Prace IPPT - IFTR Reports, ISSN: 2299-3657, No.42, pp.1-29, 1971
9.Gutkowski W., Mechanika sprężystego ośrodka ciągłego z siatkową strukturą dyskretną, Prace IPPT - IFTR Reports, ISSN: 2299-3657, No.11, pp.1-14, 1970

Prace konferencyjne
1.Błachowski B.D., Gutkowski W., Wiśniewski P., Reduced order model of circular flange-bolted connection and its application to dynamic substructuring of telecommunication towers, COMPDYN 2015, 5th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 2015-05-25/05-27, Crete Island (GR), pp.C1504-1-12, 2015

Streszczenie:

The paper deals with a nonlinear analysis of a tall tower, with Circular Flange Bolted Connections (CFBC), in which friction and contact effects are taken into account. Due to these nonlinearities, a detailed dynamic model of the whole structure would lead to very complex computational problem, unable for practical solutions. To overcome these difficulties a reduced order model of CFBC is proposed. Such a model enables the simulation of the whole tower including nonlinearities in connections. The paper is illustrated with an example of model reduction and dynamic calculations for a contemporary telecommunication tower. The tower is assembled of 4 truss segments, of triangular cross section, interconnected with CFBCs. Finally, the influence of the number of modes, included in the reduced order model, on the accuracy and computational effect, is discussed.

Słowa kluczowe:

Reduced order modeling, Circular flange-bolted connections, Dynamic substructuring, Nonlinear contact and friction effects, Telecommunication towers

Afiliacje autorów:

Błachowski B.D.-IPPT PAN
Gutkowski W.-other affiliation
Wiśniewski P.-IPPT PAN
2.Gutkowski W., Błachowski B., Revised assumptions for monitoring and control of 3D lattice structures, 11th Pan-American Congress of Applied Mechanics, 2010-01-04/01-08, Paraná (BR), pp.PAC0366-59, 2010

Streszczenie:

A successful structural monitoring and control systems should be able to discern critical events, scan frequencies and dynamic ranges. This, in turn, requires that models, applied in these systems, are as close as possible to real structural behavior. Many structures, among them, electricity transmission towers, windmills, radio and TV masts, bridges and parabolic dishes, concentrating solar energy, are build as trusses. All of them are subjected dynamic loadings coming, mostly from wind gusts, water waves and thermal activity of sun. The paper is revising assumptions, commonly made for trusses. The main assumption made is that systems of rods are pin joint. Such structures don’t exist, in real engineering design. All, above, mentioned structures are made with rigid or flexible joints. The “pin joint” assumption was made for static analyses. It stated that if joint displacements caused by rod bending can be neglected, comparing with displacements caused by rod elongations, the structural system can be considered as pin joint. As it is commonly known, such cases occur when some necessary conditions joining number of joints and hinges are fulfilled. The “pin joint”, static assumptions has been, without any formal justification, taken for granted in dynamics. Simple examples presented in the paper show that “pin joint” assumption can lead to considerable errors. The paper is illustrated with two numerical examples (simple 2 bar structure and 25 bar transmission tower). Presented examples allowing to compare results of different assumptions applied for structural elements connections.

Słowa kluczowe:

lattice structures, monitoring, control, structural dynamics

Afiliacje autorów:

Gutkowski W.-other affiliation
Błachowski B.-IPPT PAN
3.Błachowski B., Gutkowski W., Optimal vibration control of guyed masts, ICTAM XXI, 21st International Congress of Theoretical and Applied Mechanics, 2004-08-15/08-21, Warszawa (PL), pp.SM3-10457, 2004

Streszczenie:

Topics considered in this paper include: dynamic properties of the mast and nonlinearities present in the problem, linearized equations governing guyed mast motion, conditions of stability, contollability and observability. Control forces are exerted by an anchored mechanism in such a way, that they change tension in guy cables. A control algorithm ensuring robust optimal control is also proposed. Finally, the paper is verified by a numerical simulation of a vibration control process.

Słowa kluczowe:

guyed mast, vibration control

Afiliacje autorów:

Błachowski B.-IPPT PAN
Gutkowski W.-IPPT PAN

Abstrakty konferencyjne
1.Błachowski B., Gutkowski W., Wiśniewski P., Dynamic substructuring approach for human induced vibration of a suspension footbridge, PCM-CMM 2015, 3rd Polish Congress of Mechanics and 21st Computer Methods in Mechanics, 2015-09-08/09-11, Gdańsk (PL), pp.307-308, 2015

Streszczenie:

A substructuring method for the prediction of the dynamic response of footbridges subjected to loadings induced by a pedestrian is presented. The dynamic system is composed of two independent subsystems. The first one is the model of the suspension footbridge, and the second one is the model of a pedestrian. The former is obtained using the standard finite element method, while the latter is created by applying a two-step identification approach. The first step is an inverse kinematics based on an experimental human motion analysis. The second one relies on Proper Orthogonal Decomposition extracting a number of most important modes, describing the motion of the pedestrian. The presented methodology will be demonstrated by a numerical example of the pedestrian-footbridge interaction.

Słowa kluczowe:

dynamic substructuring, human-structure interaction, suspension footbridges

Afiliacje autorów:

Błachowski B.-IPPT PAN
Gutkowski W.-other affiliation
Wiśniewski P.-IPPT PAN
2.Błachowski B., Gutkowski W., Discrete optimization of structures subjected to dynamic loads using graph representation, CMM 2011, 19th International Conference on Computer Methods in Mechanics, 2011-05-09/05-12, Warszawa (PL), pp.054-1-2, 2011

Streszczenie:

A relatively simple method of finding discrete minimum structural weight is proposed. It is based on a tree graph, representing discrete values of the structural volume. In the proposed method, the number of analyses is limited to the order of two. The paper is illustrated with an example containing up to 42 to the power 38 combinations.

Słowa kluczowe:

structural optimization, problem oriented optimization, discrete optimization, combinatorial optimization, graphs, structural static and dynamic analyses, time domain, frequency domain

Afiliacje autorów:

Błachowski B.-IPPT PAN
Gutkowski W.-other affiliation
3.Błachowski B., Gutkowski W., Verification of assumptions in dynamics of lattice structures, SolMech 2010, 37th Solid Mechanics Conference, 2010-09-06/09-10, Warszawa (PL), pp.284-285, 2010

Streszczenie:

The paper is illustrated with numerical examples of two bar and 25 bar tower structures. Results of different assumptions, applied to the structural elements connections are discussed.

Słowa kluczowe:

Transmission towers, monitoring of structures

Afiliacje autorów:

Błachowski B.-IPPT PAN
Gutkowski W.-IPPT PAN
4.Błachowski B., Gutkowski W., A Hybrid Continuous-Discrete Approach to Large Discrete Structural Optimization Problems, SolMech 2008, 36th Solid Mechanics Conference, 2008-09-09/09-12, Gdańsk (PL), pp.368-369, 2008

Streszczenie:

In this study, the idea of removing redundant material is enhanced by combining the continuous and discrete solutions. At the end of the paper, several numerical examples, with numbers of combinations up to 308 are presented and their effectiveness is validated.

Słowa kluczowe:

discrete optimization, removing redundant material

Afiliacje autorów:

Błachowski B.-IPPT PAN
Gutkowski W.-IPPT PAN
5.Błachowski B., Gutkowski W., Vibration control of masts with tendons, SolMech 2002, 34th Solid Mechanics Conference, 2002-09-02/09-07, Zakopane (PL), 2002

Streszczenie:

The objective of this paper is a numerical simulation of vibration control of a mast supported by tendons. This problem requires knowledge from many different disciplines such as multibody dynamics, control theory and numerical methods.

Słowa kluczowe:

vibration control, wind disturbances

Afiliacje autorów:

Błachowski B.-IPPT PAN
Gutkowski W.-IPPT PAN