Institute of Fundamental Technological Research
Polish Academy of Sciences

Partners

Krzysztof Wieczorek

Wroclaw University of Science and Technology (PL)

Recent publications
1.  Śmietanka H., Wieczorek K., Ranachowski P., Ranachowski Z., Brodecki A., Procesy degradacji w elementach tekstolitowych ograniczników przepięć, PRZEGLĄD ELEKTROTECHNICZNY, ISSN: 0033-2097, DOI: 10.15199/48.2022.10.48, Vol.98, No.10, pp.216-220, 2023

Abstract:
W pracy przedstawiono wyniki badań próbek tekstolitowych elementów osłonowo-centrujących z eksploatowanych ograniczników przepięć SN. Prądy wyładowcze (zwarciowe) o zróżnicowanym natężeniu i czasie trwania spowodowały w tworzywie elementów efekty degradacji o różnym stopniu zaawansowania, które badano z wykorzystaniem metod mikroskopowych i mikroanalizy rentgenowskiej EDS. Udokumentowano zmiany w składzie elementarnym (zawartości pierwiastków) warstwy wierzchniej tworzyw tekstolitowych - w miarę postępu efektów degradacji. Wykazano, że tworzywa te posiadają niewystarczającą odporność na skutki awaryjnej pracy ogranicznika przy jego zawilgoceniu, które jest konsekwencją rozszczelnienia osłony.

Keywords:
ogranicznik przepięć, tekstolit szklany TSE, prąd wyładowczy (zwarciowy), metoda EDS

Affiliations:
Śmietanka H. - Institute of Power Engineering (PL)
Wieczorek K. - Wroclaw University of Science and Technology (PL)
Ranachowski P. - IPPT PAN
Ranachowski Z. - IPPT PAN
Brodecki A. - IPPT PAN
2.  Śmietanka H., Ranachowski P., Ranachowski Z., Wieczorek K., Kudela Jr.S., Effects of degradation in textolite elements of damaged surge arresters, Energies, ISSN: 1996-1073, DOI: 10.3390/en15103643, Vol.15, No.10, pp.3643-1-19, 2022

Abstract:
The aim of this work was to investigate the effects of the currents flowing through surge arresters on the internal insulating textolite structure. The samples were removed from high-voltage arresters that were taken out of service due to malfunction or failure. Discharge (short-circuit) currents of diverse intensities and durations caused degradation effects of varying degrees of advancement in the material of the tested elements. The samples were examined using microscopic methods. The use of the microanalysis technique EDS (energy-dispersive X-ray spectroscopy) made it possible to register changes in the elemental composition of the surface layer of the textolite materials, along with the intensification of the degradation effects. It was found that the high discharge current flows were subject to melting, charring and even burning of the organic adhesive. These effects caused serious changes in the content of elements in the top layer of the textolite and were the cause of a reduction in the service life, durability and reliability of the surge arresters. It was shown that the textolite materials had insufficient resistance to the effects of the emergency operation of the arresters after moisture ingress, which was a consequence of unsealing of the housing. A solution to this problem proposed by the authors could be the use of silicone elastomer as a covering of the textolite internal structure of surge arresters.

Keywords:
surge arrester, TSE glass textolite, discharge (short circuit) current, EDS method

Affiliations:
Śmietanka H. - Institute of Power Engineering (PL)
Ranachowski P. - IPPT PAN
Ranachowski Z. - IPPT PAN
Wieczorek K. - Wroclaw University of Science and Technology (PL)
Kudela Jr.S. - Institute of Materials and Machine Mechanics, Slovak Academy of Sciences (SK)
3.  Ranachowski Z., Wieczorek K., Ranachowski P., Dębowski T., Monitoring of Partial Discharges in Cable Insulation and Cable Head Using Acoustic Method, ARCHIVES OF ACOUSTICS, ISSN: 0137-5075, DOI: 10.24425/aoa.2022.141654, Vol.47, No.2, pp.259-265, 2022

Abstract:
The article presents the application of Acoustic Emission (AE) method for detection and registration of partial discharges (PD) generated in medium voltage (MV) cable isolation and MV cable head. The insulation of the high voltage cable is made of a flexible material whose properties are characterised by a high coefficient of attenuation of the acoustic signals. For this reason, the AE method has not been used so far to detect PD in energetic cables. The subjects of the research were the MV cable and the standard T-type cable head. The cable contained defects which were the source of partial discharges. In case of cable head the PD were provoked by thin grounded electrode which was introduced into connector opening. The results of AE measurements are presented in the form of spectrograms. Acoustic Emission was evoked when the applied voltage level reached the value of 7.5 kV for the cable and 4 kV for the cable head. The authors used the acoustic instrumentation of their own design intended for future field use. Obtaining successful results of partial discharges measurements using the acoustic method in the cable insulation makes an original contribution of the presented work.

Keywords:
partial discharges, medium voltage insulation, acoustic emission

Affiliations:
Ranachowski Z. - IPPT PAN
Wieczorek K. - Wroclaw University of Science and Technology (PL)
Ranachowski P. - IPPT PAN
Dębowski T. - IPPT PAN
4.  Wieczorek K., Ranachowski P., Ranachowski Z., Papliński P., Ageing tests of samples of glass-epoxy core rods in composite insulators subjected to high direct current (DC) voltage in a thermal chamber, Energies, ISSN: 1996-1073, DOI: 10.3390/en13246724, Vol.13, No.24, pp.6724-1-13, 2021

Abstract:
In this article, we presented the results of the tests performed on three sets of samples of glass-reinforced epoxy (GRE) core rods used in alternating current (AC) composite insulators with silicone rubber housing. The objective of this examination was to test the aging resistance of the rod material when exposed to direct current (DC) high voltage. We hypothesized that the long-term effects of the electrostatic field on the GRE core rod material would lead to a gradual degradation of its mechanical properties caused by ionic current flow. Further, we hypothesized that reducing the mechanical strength of the GRE core rod would lead to the breakage of the insulator. The first group of samples was used for reference. The samples from the second group were subjected to a temperature of about 50 °C for 6000 h. The third group of samples were aged by temperature and DC high voltage for the same time. The samples were examined using the 3-point bending test, micro-hardness measurement and microscopic analysis. No recordable degradation effects were found. Long-term temperature impact and, above all, the combined action of temperature and DC high voltage did not reduce the mechanical parameters or change the microstructure of the GRE material.

Keywords:
DC high voltage, composite insulator, glass-reinforced epoxy core, 3-point bending test, mechanical strength, micro-hardness

Affiliations:
Wieczorek K. - Wroclaw University of Science and Technology (PL)
Ranachowski P. - IPPT PAN
Ranachowski Z. - IPPT PAN
Papliński P. - Institute of Power Engineering (PL)
5.  Wieczorek K., Jaroszewski M., Ranachowski P., Ranachowski Z., Examination of the properties of samples from glass-epoxy core rods for composite insulators subjected to dc high voltage, ARCHIVES OF METALLURGY AND MATERIALS, ISSN: 1733-3490, DOI: 10.24425/123802, Vol.63, No.3, pp.1281-1286, 2018

Abstract:
This article presents the results of an examination performed on a set of samples of glass-epoxy core rods used in composite insulators with silicone rubber housings. The goal of the examination was to test the aging resistance of the core material when exposed to Direct Current (DC) high voltage. Long term exposure of a glass-epoxy core rod to DC high voltage may lead to the gradual degradation of its mechanical properties due to the ion migrations. Electrolysis of the core material (glass fiber) may cause electrical breakdown of the insulators and consequently lead to a major failure. After being aged for 6000 hours under DC high voltage, the samples were subjected to microscopic analysis. Their chemical composition was also examined using Raman spectroscopy and their dielectric losses and conductance in the broad range of frequencies were tested using dielectric spectroscopy.

Keywords:
DC high voltage, composite insulator, glass-epoxy core, dielectric spectroscopy, Raman spectroscopy

Affiliations:
Wieczorek K. - Wroclaw University of Science and Technology (PL)
Jaroszewski M. - Wroclaw University of Science and Technology (PL)
Ranachowski P. - IPPT PAN
Ranachowski Z. - IPPT PAN
6.  Ranachowski P., Ranachowski Z., Wieczorek K., Jaroszewski M., Kúdela Jr S., Study of modified aluminous porcelain subjected to mechanoacoustic tests, ARCHIVES OF METALLURGY AND MATERIALS, ISSN: 1733-3490, DOI: 10.24425/amm.2018.125110, Vol.63, No.4, pp.1821-1826, 2018

Abstract:
The paper presents the microscopic and mechanoacoustic study of degradation processes of the porcelain material C 130 type. This kind of material is used in the production of the most durable and reliable electrotechnical elements. Raw material composition of the studied porcelain was modified. This had an impact on the inner properties, cohesion and – in consequence – on operational properties of the material. Using mechanical-acoustic and microscopic methods of testing of small-size samples that were subjected to compression, it was possible to distinguish successive stages of degradation of the porcelain structure. These stages were generally typical of the porcelain materials. In the authors’ opinion, they are connected to the ageing process happening over many years of work under operating conditions. Optimization of composition and technological properties – important during technological processes – resulted in a slight decrease in inner cohesion of the porcelain. When compared to the reference material – typical domestic C 130 material, mechanical strength was somewhat lower. Carried out investigations proved that resistance of the investigated material to the ageing degradation process – during long term operation – also decreased. The improvement of technological parameters and the reduction in the number of defective elements occurred simultaneously with some decrease in the operational parameters of the material. To restore their initial high level, further work is needed to optimize the raw material composition of the porcelain.

Keywords:
electrical porcelain materials, ageing processes, acoustic emission (AE), optical microscopy

Affiliations:
Ranachowski P. - IPPT PAN
Ranachowski Z. - IPPT PAN
Wieczorek K. - Wroclaw University of Science and Technology (PL)
Jaroszewski M. - Wroclaw University of Science and Technology (PL)
Kúdela Jr S. - Institute of Materials and Machine Mechanics, Slovak Academy of Sciences (SK)
7.  Ranachowski P., Ranachowski Z., Jaroszewski M., Wieczorek K., Kúdela Jr S., Mechanoacoustic Research Method of Degradation Processes in Electroceramics Materials, IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION, ISSN: 1070-9878, DOI: 10.1109/TDEI.2015.005568, Vol.23, No.3, pp.1251-1259, 2016

Abstract:
The paper presents the concept of mechanoacoustic testing of degradation processes of ceramic materials, which is applied to diagnose high voltage insulators in operation. The method depends on the application of slowly increasing compressive loading acting on the sample, with simultaneous recording of acoustic emission (AE) descriptors. The process of loading is continued to the destruction or stopped at different stresses, and the samples are subjected to microscopic examination. Microscopic analysis of the samples enables determining the effects of stress action. The results were compared with the images of similar materials obtained from the insulators after different periods of operation. On this basis, there were distinguished consecutive stages of ageing of electrotechnical porcelain materials and corresponding effects of their structure degradation. Using slowly increasing quasi-static compressive loading in a relatively short-term mechanoacoustic test makes it possible to get results similar to those of long lasting degradation effects in operated electroinsulating objects. Using this method there is possible to describe the factors which affect short and long-term mechanical strength of the tested materials. There is also possible assessment of the validity and application of the theories explaining the strength of porcelains. There was presented research of the influence of the mullite phase on the short- and long-term mechanical strength of electrotechnical porcelain of different types.

Keywords:
Degradation, Stress, Insulators, Porcelain, Aging, Microscopy

Affiliations:
Ranachowski P. - IPPT PAN
Ranachowski Z. - IPPT PAN
Jaroszewski M. - Wroclaw University of Science and Technology (PL)
Wieczorek K. - Wroclaw University of Science and Technology (PL)
Kúdela Jr S. - Institute of Materials and Machine Mechanics, Slovak Academy of Sciences (SK)
8.  Ranachowski P., Rejmund F., Ranachowski Z., Jaroszewski M., Pospieszna J., Wieczorek K., Acoustic investigations of long-rod insulators and their material properties, IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION, ISSN: 1070-9878, Vol.17, No.1, pp.81-88, 2010

Abstract:
The paper presents a nondestructive ultrasonic method of investigating long-rod insulators used on overhead power lines and in substations. A correlation between the degree of degradation of porcelain C 120 and the ultrasonic wave propagation and attenuation parameters was established. The ultrasonic method was used to analyze the quality of groups of line and post insulators after many years of service. Also a new mechanoacoustic method of investigating the stages in the degradation of insulator porcelain was applied. As a result of the investigations carried out on samples of porcelain C 130 the successive stages in the degradation of ceramic insulators during their service life were determined.

Keywords:
Ceramic insulators, insulator testing, acoustic measurements, ultrasonic applications, acoustic emission

Affiliations:
Ranachowski P. - IPPT PAN
Rejmund F. - IPPT PAN
Ranachowski Z. - IPPT PAN
Jaroszewski M. - Wroclaw University of Science and Technology (PL)
Pospieszna J. - Wroclaw University of Science and Technology (PL)
Wieczorek K. - Wroclaw University of Science and Technology (PL)
9.  Ranachowski P., Rejmund F., Jaroszewski M., Wieczorek K., Study of structural degradation of ceramic material of insulators in long term operation, ARCHIVES OF METALLURGY AND MATERIALS, ISSN: 1733-3490, Vol.54, No.1, pp.205-216, 2009

Category A Plus

IPPT PAN

logo ippt            Pawińskiego 5B, 02-106 Warsaw
  +48 22 826 12 81 (central)
  +48 22 826 98 15
 

Find Us

mapka
© Institute of Fundamental Technological Research Polish Academy of Sciences 2024