Partners

Abstract:
Aiming at biomedical applications, the present work developed a new bio-nanocomposite fibrous mat based on natural rubber (NR) reinforced with 45S5 bioglass particles (BG) and cellulose nanowhiskers (CNW), which reveals excellent mechanical properties, good biocompatibility and bioactivity properties.
Analyses of the specimens were conducted by means of morphological observa-tions (SEM) and thermal analysis (TG/DTG), as well as mechanical tests used to verify the effect of the incorporation of BG particles and CNW on the ultimate properties of these flexible NR-CWN/BG fibrous membranes. An SEM analysis revealed that all filaments possessed a ribbon-like morphology, with increasing diameters as the BG concentration increased. This likely results from an increased viscosity of the solution used for fiber blowing. In comparison with neat NR fibrous mats, the ultimate mechanical properties of bio-nanocomposites were sig-nificantly improved due to the presence of CNW and BG particles dispersed in the
NR matrix. According to the TG/DTG analysis, the specimens' thermal stability was unaffected by the high BG content, and the thermal profiles were similar,
with isoprene chains decomposition of the NR occurring between 350 and 450C. In-vitro analysis on fibroblasts confirmed that the bio-nanocomposite fibrous mats
are noncytotoxic. It was found that fibrous mats enhanced cellular growth and hold great promise for tissue engineering applications.

Keywords:
bioactive particles,cellulose nanowhiskers,fibrous mat bio-nanocomposite,natural rubber

Abstract:
The solution blow spinning technique was used to fabricate a new biocomposite fibrous mat consisting of natural rubber (NR) and polyhydroxybutyrate (PHB) bioblend, with various loads of 45S5 bioglass (BG) particles. According to SEM analysis, NR fibers exhibited ribbon-like morphologies, whereas the addition of PHB resulted in improved fiber formation and a reduction in their diameter. In NR-PHB/BG biocomposites with varying BG loadings, typical thermal degradation events of PHB (stage i) and NR (stage ii) were observed. In comparison with pure PHB, the TG/DTG curves of NR-PHB/BG specimens revealed a lower stage i degradation peak. Such an outcome is possibly due to the fact that PHB in the NR-PHB fibers is located predominantly at the surface, that is, PHB is more susceptible to thermal degradation. The NR-PHB/BG biocomposite possessed an increased stiffness due to the addition of PHB and BG, resulting in an increased stress and a decreased strain at rupture compared to the pure NR and NR-PHB mats. DMA analysis revealed two well-defined regions, above and below the glass transition temperature (Tg), for the storage modulus (E') of the NR-PHB/BG specimens. The values of E' were in both regions for NR-PHB/BG specimens increased at higher BG content. The measured tanδ = E″/E' was used to determine the Tg value for all specimens, with Tg found to be in the −49 to −46°C range. Finally, NR-PHB/BG biocomposite fibrous were proven noncytotoxic by in-vitro testing on fibroblasts. These biocomposites enhanced cell growth, holding great promise for tissue engineering applications.

Keywords:
45S5 bioglass, biocomposite fibrous mat, biomedical applications, natural rubber, polyhydroxybutyrate, solution blow spinning

Abstract:
Over the last few years, traditional drug delivery systems (DDSs) have been transformed into smart DDSs. Recent advancements in biomedical nanotech-nology resulted in introducing stimuli-responsiveness to drug vehicles. Nano-
platforms can enhance drug release efficacy while reducing the side effects of drugs by taking advantage of the responses to specific internal or external stim-uli. In this study, we developed an electrospun nanofibrous photo-responsive DDSs. The photo-responsivity of the platform enables on-demand elevated drug release. Furthermore, it can provide a sustained release profile and pre-vent burst release and high concentrations of drugs. A coaxial electrospinning setup paired with an electrospraying technique is used to fabricate core-shell PVA-PLGA nanofibers decorated with plasmonic nanoparticles. The fabricated
nanofibers have a hydrophilic PVA and Rhodamine-B (RhB) core, while the shell is hydrophobic PLGA decorated with gold nanorods (Au NRs). The presence of plasmonic nanoparticles enables the platform to twice the amount of drug release besides exhibiting a long-term release. Investigations into the photo-responsive release mechanism demonstrate the system's potential as a “smart” drug delivery platform.

Keywords:
electrospun core-shell nanofibers,NIR-light activation,on-demand drug release,plasmonic nanoparticles,stimuli-responsive nanomaterials

Abstract:
Antimicrobial nonwovens for single use applications (e.g., diapers, sanitary napkins, medical gauze, etc.) are of utmost importance as the first line of defense against bacterial infections. However, the utilization of petrochemical nondegradable polymers in such nonwovens creates sustainability-related issues. Here, sustainable poly(hydroxybutyrate) (PHB) and ε-poly-l-lysine (ε-PLL) submicro- and microfiber-based antimicrobial nonwovens produced by a novel industrially scalable process, solution blowing, have been proposed. In such nonwovens, ε-PLL acts as an active material. In particular, it was found that most of ε-PLL is released within the first hour of deployment, as is desirable for the applications of interest. The submicro- and microfiber mat was tested against C. albicans and E. coli, and it was found that ε-PLL-releasing microfibers result in a significant reduction of bacterial colonies. It was also found that ε-PLL-releasing antimicrobial submicro- and microfiber nonwovens are safe for human cells in fibroblast culture. Mechanical characterization of these nonwovens revealed that, even though they are felt as soft and malleable, they possess sufficient strength, which is desirable in the end-user applications.

Keywords:
PHB submicro- and microfibers, antimicrobial nonwovens, ε-PLL release, E. coli, C. albicans

Abstract:
Multifunctional nanomaterials with the ability torespond to near-infrared (NIR) light stimulation are vital for thedevelopment of highly efficient biomedical nanoplatforms with apolytherapeutic approach. Inspired by the mesoglea structure ofjellyfish bells, a biomimetic multifunctional nanostructured pillowwith fast photothermal responsiveness for NIR light-controlled on-demand drug delivery is developed. We fabricate a nanoplatformwith several hierarchical levels designed to generate a series ofcontrolled, rapid, and reversible cascade-like structural changesupon NIR light irradiation. The mechanical contraction of thenanostructured platform, resulting from the increase of temper-ature to 42°C due to plasmonic hydrogel−light interaction, causesa rapid expulsion of water from the inner structure, passing through an electrospun membrane anchored onto the hydrogel core. Themutual effects of the rise in temperature and waterflow stimulate the release of molecules from the nanofibers. To expand thepotential applications of the biomimetic platform, the photothermal responsiveness to reach the typical temperature level forperforming photothermal therapy (PTT) is designed. The on-demand drug model penetration into pig tissue demonstrates theefficiency of the nanostructured platform in the rapid and controlled release of molecules, while the high biocompatibility confirmsthe pillow potential for biomedical applications based on the NIR light-driven multitherapy strategy.

Keywords:
bioinspired materials, NIR-light responsive nanomaterials, multifunctional platforms, electrospun nanofibers, plasmonic hydrogel, photothermal-based polytherapy, on-demand drug delivery

Abstract:
The dynamics of highly flexible micro- and nano-filaments are important to a variety of biological, medical, and industrial problems. The filament configuration variation and cross-stream migration in a microchannel are affected by thermal fluctuations in addition to elastic and viscous forces. Here, hydrogel nano-filaments with small bending Young's moduli are utilized to elucidate the transitional behavior of elastic Brownian filaments in an oscillatory microchannel flow. A numerical model based on chain elastic dumbbells similar to the Rouse-Zimm model accounting for elastic, viscous, and random Brownian forces is proposed and implemented. In addition, a theoretical model to describe the average orientation–deformation tensor evolution for an ensemble of filaments in an oscillatory flow is proposed. The results are compared with the evolution observed in the experiments.

Abstract:
Our aim is to explore, both experimentally and theoretically, the cumulative effects of small particle–liquid density difference, where the particles are used as tracers in recirculating flow. As an example we take a flow field generated in a differentially heated cavity. The main flow structure in such a cavity consists in one or two spiraling motions. Long‐term observations of such structures with the help of tracers (small particles) indicated that accumulation of the particles may set in at some flow regions. For theoretical insight into the phenomenon, a simple analytical model of recirculating (rotating) flow was studied. It was assumed that particles are spherical and rigid, and their presence does not affect the flow field. The particle Reynolds number is negligibly small, hence only the effects of particle–liquid density difference are of importance. Besides buoyancy, the effects of Saffman’s force and the inertial forces are also taken into account when calculating particle trajectories. Both cases were analyzed, particles with density slightly higher and lower than the fluid. It was found that in our case the inertial forces are egligible. In the numerical experiment trajectories of particles were investigated. The particles were allocated at random in the flow field obtained by numerical solution of the natural convection in the differentially heated cavity. In the experimental part, behavior of a dilute particle suspension in the convective cell was explored. In the model‐analytical study of a simple spiraling motion, it was found that due to the interaction of the recirculating convective flow field and the gravity‐buoyancy force, the particles may be trapped in some flow regions, whereas the rest of the flow field becomes particle‐free. This prediction agrees fairly well with the numerical and experimental findings.