Institute of Fundamental Technological Research
Polish Academy of Sciences

Partners

D. Schob


Recent publications
1.  Tabin J., Kawałko J., Schob D., Roszak R., Brodecki A., Bała P., Maasch P., Kowalewski Z. L., Ziegenhorn M., Deformation-induced martensitic transformation in fused filament fabrication austenitic stainless steels during tension at wide range of temperatures (77 K, RT), MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ISSN: 0921-5093, DOI: 10.1016/j.msea.2025.149552, Vol.950, No.149552, pp.1-13, 2025

Abstract:
This study investigates the mechanical behaviour of fused filament fabrication (FFF) of 316L austenitic stainless steel compared to conventional 316L at room temperature and 77 K, focusing on deformation-induced martensitic transformation (DIMT). Results reveal that the Lüders-like effect, present in conventional 316L at 77 K, is absent in FFF 316L due to porosities that hinder martensitic front propagation. At room temperature, uniform strain distribution and DIMT were observed in conventional 316L, whereas in FFF 316L, martensitic nucleation occurred around pores, serving as a localized strengthening mechanism. Microstructural analysis identified Fe-δ islands along grain boundaries in FFF 316L, which contribute to its multiphase nature. Although FFF 316L demonstrates lower yield stress and elongation compared to conventional 316L, this study does not establish design allowables. The present findings are limited to monotonic tensile behaviour, fatigue performance and corrosion resistance under cryogenic conditions were not assessed. Further optimization of fabrication parameters to minimize ferrite content and porosities is suggested to enhance mechanical performance

Keywords:
TRIP effect, Fused filament fabrication, 316L, Cryogenic temperatures, Microstructure

Affiliations:
Tabin J. - IPPT PAN
Kawałko J. - other affiliation
Schob D. - other affiliation
Roszak R. - other affiliation
Brodecki A. - IPPT PAN
Bała P. - AGH University of Science and Technology (PL)
Maasch P. - other affiliation
Kowalewski Z. L. - IPPT PAN
Ziegenhorn M. - other affiliation

Conference abstracts
1.  Schob D., Tabin J., Kawałko J., Maasch P., Roszak R., Richter L., Kowalewski Z., Ziegenhorn M., DEFORMATION-INDUCED MARTENSITIC TRANSFORMATION IN FUSED FILAMENT FABRICATED AUSTENITIC STAINLESS STEELS DURING TENSION AT WIDE RANGE OF TEMPERATURES. PART 2: NUMERICAL SIMULATION, SolMech 2024, 43rd Solid Mechanics Conference, 2024-09-16/09-18, Wrocław (PL), pp.52-52, 2024

Keywords:
Phase transformation, Deformation-induced martensitic transformation, 316L, Fused Deposition Modelling

Affiliations:
Schob D. - other affiliation
Tabin J. - IPPT PAN
Kawałko J. - other affiliation
Maasch P. - other affiliation
Roszak R. - other affiliation
Richter L. - other affiliation
Kowalewski Z. - IPPT PAN
Ziegenhorn M. - other affiliation
2.  Tabin J., Schob D., Kawałko J., Brodecki A., Ranachowski Z., Maasch P., Roszak R., Ziegenhorn M., Kowalewski Z., DEFORMATION-INDUCED MARTENSITIC TRANSFORMATION IN FUSED FILAMENT FABRICATED AUSTENITIC, SolMech 2024, 43rd Solid Mechanics Conference, 2024-09-16/09-18, Wrocław (PL), pp.51-51, 2024

Keywords:
Deformation-induced martensitic transformation, Austenitic Stainless Steel, Additive Manufacturing, DIC, Cryogenic temperatures

Affiliations:
Tabin J. - IPPT PAN
Schob D. - other affiliation
Kawałko J. - other affiliation
Brodecki A. - IPPT PAN
Ranachowski Z. - IPPT PAN
Maasch P. - other affiliation
Roszak R. - other affiliation
Ziegenhorn M. - other affiliation
Kowalewski Z. - IPPT PAN

Category A Plus

IPPT PAN

logo ippt            Pawińskiego 5B, 02-106 Warsaw
  +48 22 826 12 81 (central)
  +48 22 826 98 15
 

Find Us

mapka
© Institute of Fundamental Technological Research Polish Academy of Sciences 2025