Institute of Fundamental Technological Research
Polish Academy of Sciences

Partners

J. Málek

Charles University (CZ)

Recent publications
1.  Malek J., Rajagopal K.R., Tůma K., A thermodynamically compatible model for describing asphalt binders: solutions of problems, International Journal of Pavement Engineering, ISSN: 1029-8436, DOI: 10.1080/10298436.2015.1007575, Vol.17, No.6, pp.550-564, 2016

Abstract:
In this sequel to the first paper (Málek et al., 2014. International Journal of Pavement Engineering), in which we identified a generalisation of the model due to Burgers which was corroborated against two sets of experiments, including a challenging one showing distinctly different relaxation times for shear and normal stresses, we solve several time-dependent boundary value problems wherein the boundary of the material is deforming, that have relevance to applications involving asphalt. Problems wherein the boundary is subject to time-varying compressive loads such as those due to moving automobiles and the attendant rutting, and the compaction due to rollers are considered in additions to other problems.

Keywords:
rate type fluid, asphalt, finite element method, monolithic ALE method

Affiliations:
Malek J. - Charles University (CZ)
Rajagopal K.R. - Texas A&M University (US)
Tůma K. - IPPT PAN
2.  Malek J., Rajagopal K.R., Tůma K., On a variant of the Maxwell and Oldroyd-B models within the context of a thermodynamic basis, INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, ISSN: 0020-7462, DOI: 10.1016/j.ijnonlinmec.2015.03.009, Vol.76, pp.42-47, 2015

Abstract:
In this paper we develop models within a thermodynamic standpoint that are very similar in form to the classical Maxwell and Oldroyd-B models but differ from them in one important aspect, the manner in which they unload instantaneously from the deformed configuration. As long as the response is not instantaneous, the models that are derived cannot be differentiated from the Maxwell and Oldroyd-B models, respectively. The models can be viewed within the context of materials whose natural configuration evolves, the evolution being determined by the maximization of the rate of entropy production of the material. However, the underpinnings to develop the model are quite different from an earlier development by Rajagopal and Srinivasa [8] in that while the total response of the viscoelastic fluid satisfies the constraint of an incompressible material, the energy storage mechanism associated with the elastic response is allowed to be that for a compressible elastic solid and the dissipative mechanism associated with the viscous response allowed to be that for a compressible fluid, the total deformation however being isochoric. The analysis calls for a careful evaluation of firmly held customs in viscoelasticity wherein it is assumed that it is possible to subject a material to a purely instantaneous elastic response without any dissipation whatsoever. Finally, while the model developed by Rajagopal and Srinivasa [8] arises from the linearization of the non-linear elastic response that they chose and leads to a model wherein the instantaneous elastic response is isochoric, here we develop the model within the context of a different non-linear elastic response that need not be linearized but the instantaneous elastic response not necessarily being isochoric.

Keywords:
Rate type fluid, Maxwell, Oldroyd-B, Compressible neo-Hookean, Thermodynamical compatibility

Affiliations:
Malek J. - Charles University (CZ)
Rajagopal K.R. - Texas A&M University (US)
Tůma K. - IPPT PAN
3.  Malek J., Rajagopal K.R., Tůma K., A thermodynamically compatible model for describing the response of asphalt binders, International Journal of Pavement Engineering, ISSN: 1029-8436, DOI: 10.1080/10298436.2014.942860, Vol.16, No.4, pp.297-314, 2015

Abstract:
In this paper, we develop a model from a thermodynamic standpoint that seems capable of describing the nonlinear response of asphalt binders. We test the efficacy of the model by comparing its predictions against two different sets of torsion experiments on asphalt binders. The first set of experiments that we use for corroborating the model was carried out by Narayan et al. [2012. Mechanics Research Communications, 43, 66–74] wherein for the first time it was found that the relaxation times associated with the torque and the normal forces, in a torsion experiment, are markedly different, and the second set of experiments that we use to corroborate the model documents the overshoot of torque in a torsion experiment [Krishnan and Narayan, 2007. Steady shear experiments on ashpalt. Chennai: IIT, Madras]. The model that is developed in this paper fits both sets of experiments well, and it seems to be a good candidate for describing the response of asphalt binders in general. As the deformation is nonlinear, it would be inappropriate to use the linearised viscoelastic model which is based on the linearised strain, and the models due to Maxwell, and the Oldroyd-B model are unable to capture the marked difference in the relaxation times, while the Burgers model is unable to describe the torque overshoot.

Keywords:
stress relaxation, normal forces, torque, rate type fluid, asphalt, experiment fitting

Affiliations:
Malek J. - Charles University (CZ)
Rajagopal K.R. - Texas A&M University (US)
Tůma K. - Charles University (CZ)
4.  Hron J., Kratochvil J., Malek J., Rajagopal K.R., Tůma K., A thermodynamically compatible rate type fluid to describe the response of asphalt, Mathematics and Computers in Simulation, ISSN: 0378-4754, DOI: 10.1016/j.matcom.2011.03.010, Vol.82, No.10, pp.1853-1873, 2012

Abstract:
In this paper, we consider two models that have been recently developed from a thermodynamic standpoint and that are capable of describing the response of nonlinear viscoelastic fluids. We test the efficacy of both models by comparing their predictions against torsion experiments conducted for asphalt, a material that is notoriously difficult to model. Both the models seem to describe the response adequately, though neither is really very accurate. This should not be surprising as asphalt is a heterogenous material comprising of many components which is being homogenized and modeled as a single constituent viscoelastic fluid.

Keywords:
Rate type fluid, Large deformation, Numerical simulation

Affiliations:
Hron J. - Charles University in Prague (CZ)
Kratochvil J. - other affiliation
Malek J. - Charles University (CZ)
Rajagopal K.R. - Texas A&M University (US)
Tůma K. - Charles University (CZ)

Category A Plus

IPPT PAN

logo ippt            Pawińskiego 5B, 02-106 Warsaw
  +48 22 826 12 81 (central)
  +48 22 826 98 15
 

Find Us

mapka
© Institute of Fundamental Technological Research Polish Academy of Sciences 2024