Institute of Fundamental Technological Research
Polish Academy of Sciences

Partners

Yafei Xue

South China Normal Universit (CN)

Recent publications
1.  Xue YP., Jang H., Byra M., Cai ZY., Wu M., Chang EY., Ma YJ., Su J., Automated cartilage segmentation and quantification using 3D ultrashort echo time (UTE) cones MR imaging with deep convolutional neural networks, European Radiology, ISSN: 1432-1084, DOI: 10.1007/s00330-021-07853-6, Vol.31, pp.7653-7663, 2021

Abstract:
Objective: To develop a fully automated full-thickness cartilage segmentation and mapping of T1, T1ρ, and T2*, as well as macromolecular fraction (MMF) by combining a series of quantitative 3D ultrashort echo time (UTE) cones MR imaging with a transfer learning–based U-Net convolutional neural networks (CNN) model. Methods: Sixty-five participants (20 normal, 29 doubtful-minimal osteoarthritis (OA), and 16 moderate-severe OA) were scanned using 3D UTE cones T1 (Cones-T1), adiabatic T1ρ (Cones-AdiabT1ρ), T2* (Cones-T2*), and magnetization transfer (Cones-MT) sequences at 3 T. Manual segmentation was performed by two experienced radiologists, and automatic segmentation was completed using the proposed U-Net CNN model. The accuracy of cartilage segmentation was evaluated using the Dice score and volumetric overlap error (VOE). Pearson correlation coefficient and intraclass correlation coefficient (ICC) were calculated to evaluate the consistency of quantitative MR parameters extracted from automatic and manual segmentations. UTE biomarkers were compared among different subject groups using one-way ANOVA. Results: The U-Net CNN model provided reliable cartilage segmentation with a mean Dice score of 0.82 and a mean VOE of 29.86%. The consistency of Cones-T1, Cones-AdiabT1ρ, Cones-T2*, and MMF calculated using automatic and manual segmentations ranged from 0.91 to 0.99 for Pearson correlation coefficients, and from 0.91 to 0.96 for ICCs, respectively. Significant increases in Cones-T1, Cones-AdiabT1ρ, and Cones-T2* (p < 0.05) and a decrease in MMF (p < 0.001) were observed in doubtful-minimal OA and/or moderate-severe OA over normal controls. Conclusion: Quantitative 3D UTE cones MR imaging combined with the proposed U-Net CNN model allows a fully automated comprehensive assessment of articular cartilage.

Keywords:
deep learning, cartilage, biomarkers, osteoarthritis

Affiliations:
Xue YP. - South China Normal Universit (CN)
Jang H. - University of California (US)
Byra M. - IPPT PAN
Cai ZY. - other affiliation
Wu M. - University of California (US)
Chang EY. - University of California (US)
Ma YJ. - University of California (US)
Su J. - other affiliation
2.  Chen R., Xue Yafei ., Xu X., Yang H., Qiu T., Shui Lingling ., Wang Xin ., Zhou G., Giersig M., Pidot S., Hutchison J.A ., Akinoglu E.M., Lithography-free synthesis of periodic, vertically-aligned, multi-walled carbon nanotube arrays, NANOTECHNOLOGY, ISSN: 0957-4484, DOI: 10.1088/1361-6528/ac345a, Vol.33, No.065304 , pp.1-9, 2021

Abstract:
Until now, the growth of periodic vertically aligned multi-walled carbon nanotube (VA-
MWCNT) arrays was dependent on at least one lithography step during fabrication. Here, we demonstrate a lithography-free fabrication method to grow hexagonal arrays of self-standing VA-MWCNTs with tunable pitch and MWCNT size. The MWCNTs are synthesized by plasma enhanced chemical vapor deposition (PECVD) from Ni catalyst particles. Template guided dewetting of a thin Ni film on a hexagonally close-packed silica particle monolayer provides periodically distributed Ni catalyst particles as seeds for the growth of the periodic MWCNT arrays. The diameter of the silica particles directly controls the pitch of the periodic VA-MWCNT arrays from 600 nm to as small as 160 nm. The diameter and length of the individual MWCNTs can also be readily adjusted and are a function of the Ni particle size and PECVD time. This unique method of lithography-free growth of periodic VA-MWCNT arrays can be utilized for the fabrication of large-scale biomimetic materials

Keywords:
periodic, ithography free, nanofabrication, template guided, vertically-aligned multi- walled carbon nanotubes, self-standing

Affiliations:
Chen R. - other affiliation
Xue Yafei . - South China Normal Universit (CN)
Xu X. - other affiliation
Yang H. - South China Normal Universit (CN)
Qiu T. - other affiliation
Shui Lingling . - South China Normal Universit (CN)
Wang Xin . - other affiliation
Zhou G. - South China Normal Universit (CN)
Giersig M. - IPPT PAN
Pidot S. - other affiliation
Hutchison J.A . - other affiliation
Akinoglu E.M. - University of Melbourne (AU)
3.  Bozheyev F., Akinoglu E.M., Wu L., Lu H., Nemkayeva R., Xue Y., Jin M., Giersig M., Band gap optimization of tin tungstate thin filmsfor solar water oxidation, International Journal of Hydrogen Energy, ISSN: 0360-3199, DOI: 10.1016/j.ijhydene.2020.01.126, Vol.45, No.15, pp.8676-8685, 2020

Abstract:
Semiconducting ternary metal oxide thin films exhibit a promising application for solarenergy conversion. However, the efficiency of the conversion is still limited by a band gapof a emiconductor, which determines an obtainable internal photovoltage for solar watersplitting. In this report the tunability of the tin tungstate band gap by O2 partial pressurecontrol in the magnetron co-sputtering process is shown. A deficiency in the Sn concentration increases the optical band gap of tin ungstate thin films. The optimum band gap of 1.7 eV for tin tungstate films is achieved for a Sn to W ratio at unity, which establishes thehighest photoelectrochemical activity. In particular, a maximum photocurrent density of 0.375 mA cm^2 at 1.23 VRHE and the lowest reported onset potential of -0.24 VRHE for SnWO4 thin films without any co-catalyst are achieved. Finally, we demonstrate that a Ni protection layer on the SnWO4 thin film enhances the photoelectrochemical stability, which isof paramount importance for application.

Keywords:
thin film, tin tungstate, reactive magnetron sputtering, photocurrent density, thickness band gap

Affiliations:
Bozheyev F. - other affiliation
Akinoglu E.M. - University of Melbourne (AU)
Wu L. - other affiliation
Lu H. - South China Normal Universit (CN)
Nemkayeva R. - other affiliation
Xue Y. - South China Normal Universit (CN)
Jin M. - South China Normal Universit (CN)
Giersig M. - other affiliation

Category A Plus

IPPT PAN

logo ippt            Pawińskiego 5B, 02-106 Warsaw
  +48 22 826 12 81 (central)
  +48 22 826 98 15
 

Find Us

mapka
© Institute of Fundamental Technological Research Polish Academy of Sciences 2024