Partners

Abstract:
Photocatalytic CO2 reduction has emerged as a promising strategy for converting solar energy into valuable chemicals, capturing the attention of scientists across various disciplines. Organic and inorganic perovskites, particularly methylammonium lead bromide (MAPbBr3), have demonstrated potential in this field due to their remarkable visible-light response and carrier transport properties. However, the catalytic performance of pristine MAPbBr3 has been limited by severe charge recombination, hindering its applicability in photocatalytic systems. Here, we show that a MAPbBr3/Bi2WO6 (MA/BWO) heterojunction significantly enhances photocatalytic CO2 reduction performance compared to individual pristine MA or BWO. This enhancement is evidenced by the superior performance of the 25% MA/BWO composite, which exhibits CO and CH4 release rates of 1.82 μmol/g/h and 0.08 μmol/g/h, respectively. This improvement is attributed to the direct Z-scheme heterojunction formed between MAPbBr3 and Bi2WO6, which facilitates efficient charge separation and suppresses charge recombination. The results challenge the previous understanding of MAPbBr3-based photocatalysts and demonstrate a novel approach for developing highly active organic and inorganic perovskite photocatalysts. The successful application of the MA/BWO heterojunction in photocatalytic CO2 reduction expands the scope of organic and inorganic perovskites in the field of renewable energy conversion. By providing a broader perspective, our findings contribute to the ongoing efforts towards sustainable energy solutions, appealing

Abstract:
ransparent electrodes are vital for optoelectronic
devices, but their development has been constrained by the limitations of existing materials such as indium tin oxide (ITO) and newer alternatives. All face issues of robustness, flexibility,conductivity, and stability in harsh environments. Addressing this challenge, we developed a flexible, low-cost titanium nitride (TiN)
nanomesh transparent electrode showcasing exceptional acid−alkali resistance. The TiN nanomesh electrode, created by depositing a TiN coating on a naturally cracked gel film substrate via a sputtering method, maintains a stable electrical performance through
thousands of bending cycles. It exhibits outstanding chemical
stability, resisting strong acid and alkali corrosion, which is a key hurdle for current electrodes when in contact with acidic/alkaline materials and solvents during device fabrication. This, coupled with superior light transmission and conductivity (88% at 550 nm with a sheet resistance of ∼200 Ω/sq), challenges the reliance on conventional materials. Our TiN nanomesh electrode,successfully applied in electric heaters and electrically controlled thermochromic devices, offers broad potential beyond harsh environment applications. It enables alternative possibilities for the design and fabrication of future optoelectronics for advancements in this pivotal field.

Keywords:
transparent electrode, titanium nitride, flexible, corrosion resistant, mesh, smart window

Abstract:
wo-dimensional polystyrene sphere opals are important materials for nanotechnology applications and funda-
mental nanoscience research. They are a facile and inexpensive nanofabrication tool, but the quality factor of these opals has drastic differences between reports. Additives like ethanol, ions, and organic molecules in the aqueous particle spreading solution are known to affect the quality factor and growth efficiency of the
produced opals. However, a systematic study on the effect and optimization of some of the most effective additives has not been reported until now. Here, we investigate the influence of additives on the growth efficiency and quality factor of such monolayers formed at the air−water interface without the use of a Langmuir−Blodgett trough. The additives induced large variations in the monolayer quality factor and growth efficiency, and we found that the ideal additive content of the spreading agents is 30 wt % < cethanol < 70 wt %, 0 < cHd 2SOd 4 < 30.5 mM, and 0 < csty < 255.0 mM. This study provides a guideline for the rational composition and additive content of the spreading solution to obtain high-quality two-dimensional opals for further applications in nanofabrication and photonics and will enable researchers and application engineers to produce standardized nanofabrication materials.

Abstract:
The integration of different precursor components to form single nanostructures via one-step synthesis process is mostly restricted by the compatibility and complexity of components. Herein, a highly uniform, spherical, hollowed, and hierarchical iron oxide-wrapped Mo–polydopamine is synthesized using a one-pot liquid-phase reaction at room temperature. Mo2C is doped with Fe3O4 to harness the rich electrons in Fe dopants for effective lowering of the unoccupied d-orbitals in Mo. The surface conductivity of the as-prepared nanostructures is enhanced by decorating them with gold nanoparticles utilizing strong interaction of Au and amine. The nanocomposites are converted into carbidic hollowed structures via an annealing process without any distortion in morphology. The well-organized structure and nanosize of the particles provide efficient catalytic performance for hydrogen evolution reaction in acidic media. MoFe–C@Au exhibits a very positive onset potential of 2 mV, low Tafel slope of 50.1 mV dec^-1, and remarkable long- term stability.

Keywords:
electrocatalysts,hierarchical syntheses,hydrogen evolution,molybdenum,polydopamine

Abstract:
Plasma-treated polystyrene particles (PSP) are key building blocks in the fabrication of two- dimensional
nanostructure arrays. Oxygen plasma etching can shrink PS particles and is a widespread tool in fundamental
research and applications, but its effect has not been well understood. Here, we show that oxygen plasma induces
an ultra-thin cross-linking layer on the surface of the PSPs, which increases their solvent resistance. We found in
X-ray photoelectron spectroscopy (XPS) fine structure and valence band probing that the polymer C–C bonds are breaking and ecombining to form oxygenated functional groups. Our results explain, why oxygen plasma etched PS particles are more difficult to dissolve in nanofabrication procedures. Further, we used the ultra-thin crosslinked polymer layer to construct novel substrate-base microcavity arrays.

Keywords:
Polystyrene particle, Oxygen plasma, Cross-linking

Abstract:
Until now, the growth of periodic vertically aligned multi-walled carbon nanotube (VA-
MWCNT) arrays was dependent on at least one lithography step during fabrication. Here, we demonstrate a lithography-free fabrication method to grow hexagonal arrays of self-standing VA-MWCNTs with tunable pitch and MWCNT size. The MWCNTs are synthesized by plasma enhanced chemical vapor deposition (PECVD) from Ni catalyst particles. Template guided dewetting of a thin Ni film on a hexagonally close-packed silica particle monolayer provides periodically distributed Ni catalyst particles as seeds for the growth of the periodic MWCNT arrays. The diameter of the silica particles directly controls the pitch of the periodic VA-MWCNT arrays from 600 nm to as small as 160 nm. The diameter and length of the individual MWCNTs can also be readily adjusted and are a function of the Ni particle size and PECVD time. This unique method of lithography-free growth of periodic VA-MWCNT arrays can be utilized for the fabrication of large-scale biomimetic materials

Keywords:
periodic, ithography free, nanofabrication, template guided, vertically-aligned multi- walled carbon nanotubes, self-standing

Abstract:
Ultrasensitive sensors of various physical properties can be based on percolation systems, e.g., insulating media filled with nearly touching conducting particles. Such a system at its percolation threshold featuring the critical particle concentration, changes drastically its response (electrical conduction, light transmission, etc.) when subjected to an external stimulus. Due to the critical nature of this threshold, a given state at the threshold is typically very unstable. However, stability can be restored without significantly sacrificing the structure sensitivity by forming weak connections between the conducting particles. In this work, we employed nano-bridged nanosphere lithography to produce such a weakly connected percolation system. It consists of two coupled quasi-Babinet complementary arrays, one with weakly connected, and the other with disconnected metallic islands. We demonstrate via experiment and simulation that the physics of this plasmonic system is non-trivial, and leads to the extraordinary optical transmission at narrowly defined peaks sensitive to system parameters, with surface plasmons mediating this process. Thus, our system is a potential candidate for percolation effect based sensor applications. Promising detection schemes could be based on these effects.

Abstract:
We develop nano-bridged nanosphere lithography (NB-NSL), a modification to the widely used conventional nanosphere lithography (NSL). Nano-bridges between polystyrene (PS) spheres of a pristine NSL template are controllably formed in a two-step process: (i) spin-coating of a dilute styrene solution on top of the template, followed by (ii) oxygen plasma etching of the template. We show that the nanobridge dimensions can be precisely tuned by controlling the pre-processing conditions and the plasma etching time. The resulting lithography templates feature control over the shape and size of the apertures, which determine the morphology of the final nano-island arrays after material deposition and template removal. The unique advantage of NB-NSL is that PS particle templates based on a single PS particle diameter can be utilized for the fabrication of a variation of nano-island shapes and sizes, whereas conventional NSL yields only bowtie-shaped nano-islands, with their size being predetermined by the PS particle diameter of the template.

Keywords:
nanofabrication, nanosphere lithography, colloid lithography

Abstract:
There is an urgent need for new materials that can catalyze or drive the photoelectrochemical (PEC) conversion of solar energy into chemical energy, i.e. solar fuels. Copper bismuth oxide (CBO) is a promising photocathode material for the photochemical reduction of water. Here, we systematically control the stoichiometry of CBO thin films prepared by reactive, direct-current magnetron co-sputtering from metallic Bi and Cu targets. The intrinsic photophysical and PEC material properties are investigated and evaluated in order to determine the optimum composition for hydrogen formation. Changing the stoichiometry of the films reveals a dramatic change in the optical band gap and crystal structure of CBO. The largest photocurrent density was achieved for a copper-to-bismuth ion ratio of 0.53, close to the CuBi2O4 stoichiometry, which yielded Jph = − 0.48 mA cm^−2 at 0 VRHE (RHE = reversible hydrogen electrode). This is the highest value to date for the photochemical reduction of water with CuBi2O4 without an externally applied bias. The absorbed photon-to-current efficiency and the photostability of the films in neutral and alkaline electrolytes were also investigated.

Keywords:
CuBi2O4, copper bismuth oxide, water reduction, water splitting, photocathode, magnetron sputtering