Instytut Podstawowych Problemów Techniki
Polskiej Akademii Nauk

Partnerzy

M. Jachimek


Ostatnie publikacje
1.  Błoński S., Zaremba D., Jachimek M., Jakiela S., Wacławczyk T., Korczyk P.M., Impact of inertia and channel angles on flow distribution in microfluidic junctions, MICROFLUIDICS AND NANOFLUIDICS, ISSN: 1613-4982, DOI: 10.1007/s10404-020-2319-6, Vol.24, No.2, pp.14-1-15, 2020

Streszczenie:
In the present paper, we provide evidence of the vital impact of inertia on the flow in microfluidic networks, which is disclosed by the appearance of nonlinear velocity–pressure coupling. The experiments and numerical analysis of microfluidic junctions within the range of moderate Reynolds number (1 < Re < 250) revealed that inertial effects are of high relevance when Re > 10. Thus, our results estimate the applicability limit of the linear relationship between the flow rate and pressure drop in channels, commonly described by the so-called hydraulic resistance. Herein, we show that neglecting the nonlinear in their nature inertial effects can make such linear resistance-based approximation mistaken for the network operating beyond Re < 10. In the course of our research, we investigated the distribution of flows in connections of three channels in two flow modes. In the splitting mode, the flow from a common channel divides between two outputs, while in the merging mode, streams from two channels join together in a common duct. We tested a wide range of junction geometries characterized by parameters such as: (1) the angle between bifurcating channels (45°, 90°, 135° and 180°); (2) angle of the common channel relative to bifurcating channels (varied within the available range); (3) ratio of lengths of bifurcating channels (up to 8). The research revealed that the inertial effects strongly depend on angles between the channels. Additionally, we observed substantial differences between the distributions of flows in the splitting and merging modes in the same geometries, which reflects the non-reversibility of the motion of an inertial fluid. The promising aspect of our research is that for some combinations of both lengths and angles of the channels, the inertial contributions balance each other in such a way that the equations recover their linear character. In such an optimal configuration, the dependence on Reynolds number can be effectively mitigated.

Afiliacje autorów:
Błoński S. - IPPT PAN
Zaremba D. - IPPT PAN
Jachimek M. - inna afiliacja
Jakiela S. - inna afiliacja
Wacławczyk T. - Wroclaw University of Science and Technology (PL)
Korczyk P.M. - IPPT PAN
70p.
2.  Zaremba D., Błoński S., Jachimek M., Marijnissen M.J., Jakieła S., Korczyk P.M., Investigations of modular microfluidic geometries for passive manipulations on droplets, BULLETIN OF THE POLISH ACADEMY OF SCIENCES: TECHNICAL SCIENCES, ISSN: 0239-7528, DOI: 10.24425/119068, Vol.66, No.2, pp.139-149, 2018

Streszczenie:
Multiple pipetting is a standard laboratory procedure resulting in the compartmentalisation of a liquid sample. Microfluidics offers techniques which can replace this process by the use of tiny droplets. Passive manipulation on droplets is an interesting and promising approach for the design of microfluidic devices which on one hand are easy-to-use and on the other, execute complex laboratory procedures. We present a comprehensive study of the geometry of microfluidic components which encode different operations on droplets into the structure of the device. The understanding of hydrodynamic interactions between the continuous flow and a droplet travelling through confined space of nontrivial microfluidic geometries is crucial for a rational and efficient design of new generation of modular microfluidic processors with embedded instructions.

Słowa kluczowe:
microfluidics, two-phase flows, droplets

Afiliacje autorów:
Zaremba D. - IPPT PAN
Błoński S. - IPPT PAN
Jachimek M. - inna afiliacja
Marijnissen M.J. - IPPT PAN
Jakieła S. - Institute of Physical Chemistry, Polish Academy of Sciences (PL)
Korczyk P.M. - IPPT PAN
25p.

Kategoria A Plus

IPPT PAN

logo ippt            ul. Pawińskiego 5B, 02-106 Warszawa
  +48 22 826 12 81 (centrala)
  +48 22 826 98 15
 

Znajdź nas

mapka
© Instytut Podstawowych Problemów Techniki Polskiej Akademii Nauk 2024