Instytut Podstawowych Problemów Techniki
Polskiej Akademii Nauk

Partnerzy

M. Michalec

Jagiellonian University (PL)

Ostatnie publikacje
1.  Świątek Z., Michalec M., Levintant-Zayonts N., Bonarski J., Budziak A., Bonchyk O., Savitskij G., Structural Evolution of Near-Surface Layers in NiTi Alloy Caused by an Ion Implantation, ACTA PHYSICA POLONICA A, ISSN: 0587-4246, Vol.120, No.1, pp.75-78, 2011

Streszczenie:
The results of X-ray diffraction studies on structural changes in the near-surface layers in the NiTi alloy caused by nitrogen-ion implantation with the energy E = 50 keV and the fluence D = 1018cm°2 are presented. X-ray diffractometry, using the Philips diffractometer type X’Pert in the Bragg–Brentano geometry, was used to identify the phase composition of NiTi alloy. For layer by layer analysis of structural changes in the near-surface layers, the D8 Discover Bruker diffractometer with polycapilar beam optics was used. The ion-implanted NiTi alloy in the near-surface layer exhibits five phases: the dominating austenite phase, two martensitic phases and a small amount of the Ni4Ti3 and NTi phases. Along with the decreasing thickness of the near-surface layer investigated in material an increasing fraction of the Ni4Ti3 and NTi phases was observed. With the thickness of this layer about 340 nm, besides still existing the austenite, Ni4Ti3 and NTi phases, only one martensitic phase is present in the alloy. Further decrease of the thickness of the near-surface layer to about 170 nm leads to the increasing fraction of the Ni4Ti3 and NTi phases.

Słowa kluczowe:
X-ray diffraction, ion implantation, shape memory alloy, nitinol, phase composition

Afiliacje autorów:
Świątek Z. - Institute of Metallurgy and Materials Science, Polish Academy of Sciences (PL)
Michalec M. - Jagiellonian University (PL)
Levintant-Zayonts N. - IPPT PAN
Bonarski J. - Institute of Metallurgy and Materials Science, Polish Academy of Sciences (PL)
Budziak A. - inna afiliacja
Bonchyk O. - Ya.S. Pidstryhach Institute for Applied Problems of Mechanics and Mathematics NASU (UA)
Savitskij G. - Ya.S. Pidstryhach Institute for Applied Problems of Mechanics and Mathematics NASU (UA)
15p.
2.  Świątek Z., Levintant-Zayonts N., Michalec M., Czeppe T., Lipinski M., Bonchyk O., Savitskij G., Creation of wear-resistant near-surface-layers with inhomogeneous structure on NiTi alloy by ion implantation technology, Physics Procedia, ISSN: 1875-3892, DOI: 10.1016/j.phpro.2010.11.077, Vol.10, pp.69-76, 2010

Streszczenie:
In the present study we report the changes in the modified near-surface layer on NiTi shape memory alloy, caused by ion implantation as well as their influence on the structure and mechanical properties of this material. Experimental results of an inhomogeneous structure and tribological properties of implanted NiTi are discussed in this paper.

Słowa kluczowe:
shape memory NiTi alloy, Ion implantation, DSC, X-ray diffractometry, TEM

Afiliacje autorów:
Świątek Z. - Institute of Metallurgy and Materials Science, Polish Academy of Sciences (PL)
Levintant-Zayonts N. - IPPT PAN
Michalec M. - Jagiellonian University (PL)
Czeppe T. - Institute of Metallurgy and Materials Science, Polish Academy of Sciences (PL)
Lipinski M. - Institute of Metallurgy and Materials Science, Polish Academy of Sciences (PL)
Bonchyk O. - Ya.S. Pidstryhach Institute for Applied Problems of Mechanics and Mathematics NASU (UA)
Savitskij G. - Ya.S. Pidstryhach Institute for Applied Problems of Mechanics and Mathematics NASU (UA)
3.  Czeppe T., Levintant-Zayonts N., Świątek Z., Michalec M., Bonchyk O., Savitskij G., Inhomogeneous structure of near-surface layers in the ion-implanted niti alloy, VACUUM, ISSN: 0042-207X, DOI: 10.1016/j.vacuum.2009.01.066, Vol.83, No.Supplement 1, pp.S214-S219, 2009

Streszczenie:
This paper reports the application of nitrogen ion implantation for modification of a shape memory alloy. It is known that the problem of creating a protective surface coating for the shape memory alloy is the most acute for potential applications of this material. Thus, the problem of increasing surface protective properties and, at the same time, simultaneous preservation of functional properties of shape memory materials is a subject of research and development [Pelletier H, Muller D, Mille P, Grob J. Surf Coat Technol 2002;158:309.]. The surface characterization of nitrogen implanted (fluence 1018 cm−2 and energy 50 keV) equiatomic commercial NiTi alloy samples was performed with the assistance of high resolution transmission electron microscopy (HTEM) techniques and modifications of phase composition before and after irradiation are studied at room and martensitic transformation temperatures by X-ray diffraction methods. Differential scanning calorimetry (DSC, TA Instruments) was used to characterize the transformation sequence and transformation temperatures for the initial and surface-modified materials. Experimental results of an inhomogeneous structure of near-surface layers in the ion-implanted NiTi alloy are discussed in this paper

Słowa kluczowe:
Shape memory NiTi alloy, Ion implantation, DSC, X-ray diffractometry, TEM

Afiliacje autorów:
Czeppe T. - Institute of Metallurgy and Materials Science, Polish Academy of Sciences (PL)
Levintant-Zayonts N. - IPPT PAN
Świątek Z. - Institute of Metallurgy and Materials Science, Polish Academy of Sciences (PL)
Michalec M. - Jagiellonian University (PL)
Bonchyk O. - Ya.S. Pidstryhach Institute for Applied Problems of Mechanics and Mathematics NASU (UA)
Savitskij G. - Ya.S. Pidstryhach Institute for Applied Problems of Mechanics and Mathematics NASU (UA)
27p.

Kategoria A Plus

IPPT PAN

logo ippt            ul. Pawińskiego 5B, 02-106 Warszawa
  +48 22 826 12 81 (centrala)
  +48 22 826 98 15
 

Znajdź nas

mapka
© Instytut Podstawowych Problemów Techniki Polskiej Akademii Nauk 2024