Instytut Podstawowych Problemów Techniki
Polskiej Akademii Nauk

Partnerzy

T. Płociński

Politechnika Warszawska (PL)

Ostatnie publikacje
1.  Golasiński K.M., Janiszewski J., Sienkiewicz J., Płociński T., Zubko M., Świec P., Pieczyska E.A., Quasi-static and dynamic compressive behavior of Gum Metal: experiment and constitutive model, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, ISSN: 1073-5623, DOI: 10.1007/s11661-021-06409-z, pp.1-14, 2021

Streszczenie:
The quasi-static and high strain rate compressive behavior of Gum Metal with composition Ti-36Nb-2Ta-3Zr-0.3O (wt pct) has been investigated using an electromechanical testing machine and a split Hopkinson pressure bar, respectively. The stress–strain curves obtained for Gum Metal tested under monotonic and dynamic loadings revealed a strain-softening effect which intensified with increasing strain rate. Moreover, the plastic flow stress was observed to increase for both static and dynamic loading conditions with increasing strain rate. The microstructural characterization of the tested Gum Metal specimens showed particular deformation mechanisms regulating the phenomena of strain hardening and strain softening, namely an adiabatic shear band formed at ~ 45 deg with respect to the loading direction as well as widely spaced deformation bands (kink bands). Dislocations within the channels intersecting with twins may cause strain hardening while recrystallized grains and kink bands with crystal rotation inside the grains may lead to strain softening. A constitutive description of the compressive behavior of Gum Metal was proposed using a modified Johnson–Cook model. Good agreement between the experimental and the numerical data obtained in the work was achieved.

Afiliacje autorów:
Golasiński K.M. - IPPT PAN
Janiszewski J. - Military University of Technology (PL)
Sienkiewicz J. - Military University of Technology (PL)
Płociński T. - Politechnika Warszawska (PL)
Zubko M. - inna afiliacja
Świec P. - inna afiliacja
Pieczyska E.A. - IPPT PAN
200p.
2.  Maj M., Nowak M., Musiał S., Płociński T., Experimental analysis of material, lattice and plastic rotation during deformation of aluminium multicrystal, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ISSN: 0921-5093, DOI: 10.1016/j.msea.2020.139725, Vol.790, pp.139725-1-5, 2020

Streszczenie:
This paper focuses on the experimental determination of the distribution of material, lattice and plastic rotation during deformation of crystalline aggregate. The proposed methodology uses standard electron backscattering diffraction technique combined with 3D digital image correlation data. The presented approach is used for analysis of rotations during deformation of aluminium multicrystal.

Słowa kluczowe:
image analysis, electron backscattering diffraction, plastic deformation, misorientation, plastic rotation

Afiliacje autorów:
Maj M. - IPPT PAN
Nowak M. - IPPT PAN
Musiał S. - IPPT PAN
Płociński T. - Politechnika Warszawska (PL)
140p.
3.  Małolepszy A., Błoński S., Chrzanowska-Giżyńska J., Wojasiński M., Płociński T., Stobiński L., Szymański Z., Fluorescent carbon and graphene oxide nanoparticles synthesized by the laser ablation in liquid, APPLIED PHYSICS A-MATERIALS SCIENCE AND PROCESSING, ISSN: 0947-8396, DOI: 10.1007/s00339-018-1711-5, Vol.124, pp.282-1-7, 2018

Streszczenie:
The results of synthesis of the fluorescent carbon dots (CDots) from graphite target and reduced graphene oxide (rGO) nanoparticles performed by the nanosecond laser ablation in polyethylene glycol 200 (PEG200) are shown. Two-step laser irradiation (first graphite target, next achieved suspension) revealed a very effective production of CDots. However, the ablation in PEG appeared to be effective with 1064 nm laser pulse in contrast to the ablation with 355 nm laser pulse. In the case of rGO nanoparticles similar laser irradiation procedure was less efficient. In both cases, received nanoparticles exhibited strong, broadband photoluminescence with a maximum dependent on the excitation wavelength. The size distribution for obtained CDots was evaluated using the DLS technique and HRTEM images. The results from both methods show quite good agreement in nanoparticle size estimation although the DLS method slightly overestimates nanoparticle's diameter

Afiliacje autorów:
Małolepszy A. - Politechnika Warszawska (PL)
Błoński S. - IPPT PAN
Chrzanowska-Giżyńska J. - IPPT PAN
Wojasiński M. - Politechnika Warszawska (PL)
Płociński T. - Politechnika Warszawska (PL)
Stobiński L. - Politechnika Warszawska (PL)
Szymański Z. - IPPT PAN
30p.

Abstrakty konferencyjne
1.  Maj M., Nowak M., Musiał S., Płociński T., Experimental analysis of material, lattice and plastic rotation during deformation of aluminum multicrystal, ICSMA19, International Conference on Strength of Materials, 2022-06-26/07-01, Metz (FR), pp.1-1, 2022

Słowa kluczowe:
image analysis, plastic deformation, misorientation, plastic rotation

Afiliacje autorów:
Maj M. - IPPT PAN
Nowak M. - IPPT PAN
Musiał S. - IPPT PAN
Płociński T. - Politechnika Warszawska (PL)

Kategoria A Plus

IPPT PAN

logo ippt            ul. Pawińskiego 5B, 02-106 Warszawa
  +48 22 826 12 81 (centrala)
  +48 22 826 98 15
 

Znajdź nas

mapka
© Instytut Podstawowych Problemów Techniki Polskiej Akademii Nauk 2024