Institute of Fundamental Technological Research
Polish Academy of Sciences

Partners

Rafał Zybała

Warsaw University of Technology (PL)

Recent publications
1.  Kaszyca K., Marcin C., Bucholc B., Błyskun P., Nisar F., Rojek J., Zybała R., Using the Spark Plasma Sintering System for Fabrication of Advanced Semiconductor Materials , Materials, ISSN: 1996-1944, DOI: 10.3390/ma17061422, Vol.17, No.1422, pp.1-15, 2024

Abstract:
The interest in the Spark Plasma Sintering (SPS) technique has continuously increased over the last few years. This article shows the possibility of the development of an SPS device used for material processing and synthesis in both scientific and industrial applications and aims to present manufacturing methods and the versatility of an SPS device, presenting examples of processing Arc-Melted- (half-Heusler, cobalt triantimonide) and Self-propagating High-temperature Synthesis (SHS)-synthesized semiconductor (bismuth telluride) materials. The SPS system functionality development is presented, the purpose of which was to broaden the knowledge of the nature of SPS processes. This approach enabled the precise design of material sintering processes and also contributed to increasing the repeatability and accuracy of sintering conditions.

Keywords:
spark plasma sintering, arc melting, semiconductor materials, half-Heusler, bismuth telluride, cobalt triantimonide, SHS, SPS

Affiliations:
Kaszyca K. - Lukasiewicz Institute of Microelectronics and Photonics (PL)
Marcin C. - other affiliation
Bucholc B. - IPPT PAN
Błyskun P. - other affiliation
Nisar F. - IPPT PAN
Rojek J. - IPPT PAN
Zybała R. - Warsaw University of Technology (PL)
2.  Chmielewski M., Zybała R., Strojny-Nędza A., Piątkowska A., Dobrowolski A.P., Jagiełło J., Diduszko R., Bazarnik P., Nosewicz S., Microstructural Evolution of Ni-SiC Composites Manufactured by Spark Plasma Sintering, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, ISSN: 1073-5623, DOI: 10.1007/s11661-023-06999-w, Vol.54, No.-, pp.2191-2207, 2023

Abstract:
The presented paper concerns the technological aspects of the interface evolution in the nickel-silicon carbide composite during the sintering process. The goal of our investigation was to analyse the material changes occurring due to the violent reaction between nickel and silicon carbide at elevated temperatures. The nickel matrix composite with 20 vol pct SiC particles as the reinforcing phase was fabricated by the spark plasma sintering technique. The sintering tests were conducted with variable process conditions (temperature, time, and pressure). It was revealed that the strong interaction between the individual components and the scale of the observed changes depends on the sintering parameters. To identify the microstructural evolution, scanning electron microscopy, energy dispersive spectroscopy, transmission electron microscopy, X-ray diffraction, and Raman spectroscopy were used. The silicon carbide decomposition process progresses with the extension of the sintering time. As the final product of the observed reaction, new phases from the Ni-Si system and free carbon were detected. The step-by-step materials evolution allowed us to reveal the course of the reaction and the creation of the new structure, especially in the reaction zone. The detailed analysis of the SiC decomposition and formation of new components was the main achievement of the presented paper.

Affiliations:
Chmielewski M. - Institute of Electronic Materials Technology (PL)
Zybała R. - Warsaw University of Technology (PL)
Strojny-Nędza A. - Institute of Electronic Materials Technology (PL)
Piątkowska A. - Institute of Electronic Materials Technology (PL)
Dobrowolski A.P. - Military University of Technology (PL)
Jagiełło J. - other affiliation
Diduszko R. - Tele and Radio Research Institute (PL)
Bazarnik P. - Warsaw University of Technology (PL)
Nosewicz S. - IPPT PAN
3.  Chmielewski M., Pietrzak K., Teodorczyk M., Nosewicz S., Jarząbek D.M., Zybała R., Bazarnik P., Lewandowska M., Strojny-Nędza A., Effect of metallic coating on the properties of copper-silicon carbide composites, APPLIED SURFACE SCIENCE, ISSN: 0169-4332, DOI: 10.1016/j.apsusc.2016.12.130, Vol.421, pp.159-169, 2017

Abstract:
In the presented paper a coating of SiC particles with a metallic layer were used to prepare copper matrix composite materials. The role of the layer was to protect the silicon carbide from decomposition and dissolution of silicon in the copper matrix during the sintering process. The SiC particles were covered by chromium, tungsten and titanium using Plasma Vapour Deposition method. After powder mixing of components, the final densification process via Spark Plasma Sintering (SPS) method at temperature 950C was provided. The almost fully dense materials were obtained (> 97.5%). The microstructure of obtained composites was studied using scanning electron microscopy as well as transmission electron microscopy. The microstructural analysis of composites confirmed that regardless of the type of deposited material, there is no evidence for decomposition process of silicon carbide in copper. In order to measure the strength of the interface between ceramic particles and the metal matrix, the micro tensile tests have been performed. Furthermore, thermal diffusivity was measured with the use of the laser pulse technique. In the context of performed studies, the tungsten coating seems to be the most promising solution for heat sink application. Compared to pure composites without metallic layer, Cu-SiC with W coating indicate the higher tensile strength and thermal diffusitivy, irrespective of an amount of SiC reinforcement. The improvement of the composite properties is related to advantageous condition of Cu-SiC interface characterized by well homogenity and low porosity, as well as individual properties of the tungsten coating material.

Keywords:
metal matrix composites, silicon carbide, metallic layers deposition, thermal conductovity, interface strength

Affiliations:
Chmielewski M. - Institute of Electronic Materials Technology (PL)
Pietrzak K. - other affiliation
Teodorczyk M. - Institute of Electronic Materials Technology (PL)
Nosewicz S. - IPPT PAN
Jarząbek D.M. - IPPT PAN
Zybała R. - Warsaw University of Technology (PL)
Bazarnik P. - Warsaw University of Technology (PL)
Lewandowska M. - other affiliation
Strojny-Nędza A. - Institute of Electronic Materials Technology (PL)
4.  Zybała R., Mars K., Mikuła A., Bogusławski J., Soboń G., Sotor J., Schmidt M., Kaszyca K., Chmielewski M., Ciupiński L., Pietrzak K., Synthesis and characterization of antimony telluride for thermoelectric and optoelectronic applications, ARCHIVES OF METALLURGY AND MATERIALS, ISSN: 1733-3490, DOI: 10.1515/amm-2017-0155, Vol.62, No.2B, pp.1067-1070, 2017

Abstract:
Antimony telluride (Sb2Te3) is an intermetallic compound crystallizing in a hexagonal lattice with R-3m space group. It creates a c lose packed structure of an ABCABC type. As intrinsic semiconductor characterized by excellent electrical properties, Sb2Te3 is widely used as a low-temperature thermoelectric material. At the same time, due to unusual properties (strictly connected with the structure), antimony telluride exhibits nonlinear optical properties, including saturable absorption. Nanostructurization, elemental doping and possibilities of synthesis Sb2Te3 in various forms (polycrystalline, single crystal or thin film) are the most promising methods for improving thermoelectric properties of Sb2Te3.Applications of Sb2Te3 in optical devices (e.g. nonlinear modulator, in particular saturable absorbers for ultrafast lasers) are also interesting. The antimony telluride in form of bulk polycrystals and layers for thermoelectric and optoelectronic applications respectively were used. For optical applications thin layers of the material were formed and studied. Synthesis and structural characterization of Sb2Te3 were also presented here. The anisotropy (packed structure) and its influence on thermoelectric properties have been performed. Furthermore, preparation and characterization of Sb2Te3 thin films for optical uses have been also made

Keywords:
antimony telluride, thermoelectric materials, thin films, PVD magnetron sputtering, topological insulator

Affiliations:
Zybała R. - Warsaw University of Technology (PL)
Mars K. - AGH University of Science and Technology (PL)
Mikuła A. - AGH University of Science and Technology (PL)
Bogusławski J. - Wroclaw University of Science and Technology (PL)
Soboń G. - Wroclaw University of Science and Technology (PL)
Sotor J. - Wroclaw University of Science and Technology (PL)
Schmidt M. - Institute of Electronic Materials Technology (PL)
Kaszyca K. - Lukasiewicz Institute of Microelectronics and Photonics (PL)
Chmielewski M. - Institute of Electronic Materials Technology (PL)
Ciupiński L. - Warsaw University of Technology (PL)
Pietrzak K. - other affiliation
5.  Chmielewski M., Pietrzak K., Strojny-Nędza A., Kaszyca K., Zybala R., Bazarnik P., Lewandowska M., Nosewicz S., Microstructure and thermal properties of Cu-SiC composite materials depending on the sintering technique, SCIENCE OF SINTERING, ISSN: 0350-820X, DOI: 10.2298/SOS1701011C, Vol.49, No.1, pp.11-22, 2017

Abstract:
The presented paper investigates the relationship between the microstructure and thermal properties of copper–silicon carbide composites obtained through hot pressing (HP) and spark plasma sintering (SPS) techniques. The microstructural analysis showed a better densification in the case of composites sintered in the SPS process. TEM investigations revealed the presence of silicon in the area of metallic matrix in the region close to metal ceramic boundary. It is the product of silicon dissolving process in copper occurring at an elevated temperature. The Cu-SiC interface is significantly defected in composites obtained through the hot pressing method, which has a major influence on the thermal conductivity of materials.

Keywords:
metal matrix composites, silicon carbide, interface, spark plasma sintering, thermal conductivity

Affiliations:
Chmielewski M. - Institute of Electronic Materials Technology (PL)
Pietrzak K. - other affiliation
Strojny-Nędza A. - Institute of Electronic Materials Technology (PL)
Kaszyca K. - Lukasiewicz Institute of Microelectronics and Photonics (PL)
Zybala R. - Warsaw University of Technology (PL)
Bazarnik P. - Warsaw University of Technology (PL)
Lewandowska M. - other affiliation
Nosewicz S. - IPPT PAN
6.  Zybała R., Schmidt M., Kaszyca K., Ciupiński Ł., Kruszewski M.J., Pietrzak K., Method and Apparatus for Determining Operational Parameters of Thermoelectric Modules, Journal of Electronic Materials, ISSN: 0361-5235, DOI: 10.1007/s11664-016-4712-1, Vol.45, No.10, pp.5223-5231, 2016

Abstract:
The main aim of this work was to construct and test an apparatus for characterization of high temperature thermoelectric modules to be used in thermoelectric generator (TEGs) applications. The idea of this apparatus is based on very precise measurements of heat fluxes passing through the thermoelectric (TE) module, at both its hot and cold sides. The electrical properties of the module, under different temperature and load conditions, were used to estimate efficiency of energy conversion based on electrical and thermal energy conservation analysis. The temperature of the cold side, Tc, was stabilized by a precise circulating thermostat (≤0.1°C) in a temperature range from 5°C to 90°C. The amount of heat absorbed by a coolant flowing through the heat sink was measured by the calibrated and certified heat flow meter with an accuracy better than 1%. The temperature of the hot side, Th, was forced to assumed temperature (Tmax = 450°C) by an electric heater with known power (Ph = 0–600 W) with ample thermal insulation. The electrical power was used in calculations. The TE module, heaters and cooling plate were placed in an adiabatic vacuum chamber. The load characteristics of the module were evaluated using an electronically controlled current source as a load. The apparatus may be used to determine the essential parameters of TE modules (open circuit voltage, Uoc, short circuit current, Isc, internal electrical resistance, Rint, thermal resistance, Rth, power density, and efficiency, η, as a function of Tc and Th). Several commercially available TE modules based on Bi2Te3 and Sb2Te3 alloys were tested. The measurements confirmed that the constructed apparatus was highly accurate, stable and yielded reproducible results; therefore, it is a reliable tool for the development of thermoelectric generators.

Keywords:
energy conversion efficiency, power generation, thermoelectric modules, performance characterization, heat recovery, renewable energy

Affiliations:
Zybała R. - Warsaw University of Technology (PL)
Schmidt M. - Institute of Electronic Materials Technology (PL)
Kaszyca K. - Lukasiewicz Institute of Microelectronics and Photonics (PL)
Ciupiński Ł. - Warsaw University of Technology (PL)
Kruszewski M.J. - other affiliation
Pietrzak K. - other affiliation
7.  Pietrzak K., Sobczak N., Chmielewski M., Homa M., Gazda A., Zybała R., Strojny-Nędza A., Effects of Carbon Allotropic Forms on Microstructure and Thermal Properties of Cu-C Composites Produced by SPS, Journal of Materials Engineering and Performance, ISSN: 1059-9495, DOI: 10.1007/s11665-015-1851-0, Vol.25, No.8, pp.3077-3083, 2016

Abstract:
Combination of extreme service conditions and complex thermomechanical loadings, e.g., in electronics or power industry, requires using advanced materials with unique properties. Dissipation of heat generated during the operation of high-power electronic elements is crucial from the point of view of their efficiency. Good cooling conditions can be guaranteed, for instance, with materials of very high thermal conductivity and low thermal expansion coefficient, and by designing the heat dissipation system in an accurate manner. Conventional materials such as silver, copper, or their alloys, often fail to meet such severe requirements. This paper discusses the results of investigations connected with Cu-C (multiwall carbon nanotubes (MWNTs), graphene nanopowder (GNP), or thermally reduced graphene oxide (RGO)) composites, produced using the spark plasma sintering technique. The obtained composites are characterized by uniform distribution of a carbon phase and high relative density. Compared with pure copper, developed materials are characterized by similar thermal conductivity and much lower values of thermal expansion coefficient. The most promising materials to use as heat dissipation elements seems to be copper-based composites reinforced by carbon nanotubes (CNTs) and GNP.

Keywords:
copper matrix composites, graphene, spark plasma sintering, thermal properties

Affiliations:
Pietrzak K. - other affiliation
Sobczak N. - Foundry Research Institute (PL)
Chmielewski M. - Institute of Electronic Materials Technology (PL)
Homa M. - Foundry Research Institute (PL)
Gazda A. - Foundry Research Institute (PL)
Zybała R. - Warsaw University of Technology (PL)
Strojny-Nędza A. - Institute of Electronic Materials Technology (PL)

Category A Plus

IPPT PAN

logo ippt            Pawińskiego 5B, 02-106 Warsaw
  +48 22 826 12 81 (central)
  +48 22 826 98 15
 

Find Us

mapka
© Institute of Fundamental Technological Research Polish Academy of Sciences 2024