Instytut Podstawowych Problemów Techniki
Polskiej Akademii Nauk

Partnerzy

T Tański


Ostatnie publikacje
1.  Łazarska M., Ranachowski Z., Musiał J., Tański T., Jiang Q., Identification of Phase Transformations in Alloy and Non-Alloy Steel During Austempering Using Acoustic Emission and Neural Network, Materials, ISSN: 1996-1944, DOI: 10.3390/ma18102198, Vol.18, No.2198, pp.1-16, 2025

Streszczenie:
This research was carried out for selected alloy (bearing) and non-alloy (tool) steel. The steels were subjected to austempering. The hardening temperature range was from 100 °C to 180 °C. The use of acoustic emission in connection with the artificial neural network (ANN) enabled the analysis and identification of phase changes occurring in steels during austempering. Classification of acoustic emission events was carried out with the help of their energy values and with the use of an artificial neural network. On this basis, it was observed that in the process of isothermal hardening of steel at the applied temperatures, complex transformations of austenite into martensite and bainite occur. In addition, it was found that the research methods used enabled the identification of signal components originating from the phase transformation causing the formation of thin-plate martensite midrib. The use of acoustic methods in the field of bainitic transformation creates the possibility of their application in the industry.

Słowa kluczowe:
bainite, martensite, austempering, acoustic emission (AE), neural networks

Afiliacje autorów:
Łazarska M. - Kazimierz Wielki University (PL)
Ranachowski Z. - IPPT PAN
Musiał J. - inna afiliacja
Tański T. - inna afiliacja
Jiang Q. - inna afiliacja
140p.
2.  Łazarska M., Musiał J., Tański T., Ranachowski Z., Transformations in the Ti-6Al-4V Alloy Studied Using Dilatometry Supported by Acoustic Emission, Materials, ISSN: 1996-1944, DOI: 10.3390/ma17246260, Vol.17, No.24, pp.1-12, 2024

Streszczenie:
This paper presents the results of research on the kinetics of transformations in the two-phase (α + β) Ti-6Al-4V alloy. The transformation start and end temperatures during heating at different rates were determined using a dilatometer. A modified dilatometer was employed, equipped with an acoustic emission measurement apparatus and software enabling the assessment of sample dimensional changes during heating and cooling. The results were obtained in the form of dilatometric curves. Additionally, the occurrence of the transformation was confirmed by acoustic emission signals. In the study of the Ti-6Al-4V alloy, acoustic emission refers to the application of this non-destructive technique to monitor the alloy’s behavior during thermal processes. As the temperature increased, regardless of the heating rate, the α→β transformation was observed to occur after exceeding 900 °C. Within the transformation range, acoustic emission signals were recorded. Moreover, it was found that the applied research methods enabled the identification of signal components originating from the transformation. The application of acoustic methods in the analysis of phase transformations opens new possibilities for their use in industry.

Słowa kluczowe:
Ti-6Al-4V alloy, microstructure, dilatometric tests, acoustic emission (EA)

Afiliacje autorów:
Łazarska M. - Kazimierz Wielki University (PL)
Musiał J. - inna afiliacja
Tański T. - inna afiliacja
Ranachowski Z. - IPPT PAN
140p.

Kategoria A Plus

IPPT PAN

logo ippt            ul. Pawińskiego 5B, 02-106 Warszawa
  +48 22 826 12 81 (centrala)
  +48 22 826 98 15
 

Znajdź nas

mapka
© Instytut Podstawowych Problemów Techniki Polskiej Akademii Nauk 2025