Instytut Podstawowych Problemów Techniki
Polskiej Akademii Nauk

Partnerzy

C. Czarnota

CNRS (FR)

Ostatnie publikacje
1.  Mercier S., Kowalczyk-Gajewska K., Czarnota C., Effective behavior of composites with combined kinematic and isotropic hardening based on additive tangent Mori–Tanaka scheme, COMPOSITES PART B-ENGINEERING, ISSN: 1359-8368, DOI: 10.1016/j.compositesb.2019.107052, Vol.174, pp.107052-1-21, 2019

Streszczenie:
The goal of the present work is to propose a multi-scale approach for composite materials which accounts for kinematic hardening in the phases. For that purpose, the additive/sequential interaction rule and tangent linearization of viscoplastic response proposed for elastic–viscoplastic material can be extended in a straightforward manner. A two phase composite where each phase is elastic–viscoplastic is considered. The viscoplastic flow is governed by a J2 flow theory with an overstress. To find the overall behavior of the composite, a Mori–Tanaka model is applied. Numerical validation of the proposition is carried out by considering a representative volume element with 30 inclusions. Various configurations have been tested: hard or soft inclusion cases with or without isotropic hardening. It is shown that the quality of the model predictions is not affected by the introduction of the kinematic hardening component in the local constitutive behavior. Namely, in most cases considered in the paper the overall stress–strain response as well as the average stress–strain response per phase is accurately estimated. It has been also verified that the obtained backstress components are consistent with the ones predicted by Finite element calculations with ABAQUS Software.

Słowa kluczowe:
elastic-viscoplasticity, homogenization, finite element, metal matrix composite, Mori–Tanaka scheme, kinematic hardening

Afiliacje autorów:
Mercier S. - Clermont Université (FR)
Kowalczyk-Gajewska K. - IPPT PAN
Czarnota C. - CNRS (FR)
200p.
2.  Czarnota C., Kowalczyk-Gajewska K., Salahouelhadj A., Martiny M., Mercier S., Modeling of the cyclic behavior of elastic–viscoplastic composites by the additive tangent Mori–Tanaka approach and validation by finite element calculations, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, ISSN: 0020-7683, DOI: 10.1016/j.ijsolstr.2014.12.002, Vol.56-57, pp.96-117, 2015

Streszczenie:
This work deals with the prediction of the macroscopic behavior of two-phase composites, based on the Mori–Tanaka scheme combined with an additive/sequential interaction rule and tangent linearization of viscoplastic response. Cyclic tension compression loadings are considered to further validate the approach. The composite is made of spherical inclusions dispersed in a matrix. Both materials have an elastic–viscoplastic behavior. In a second part, finite element calculations are performed using ABAQUS/STANDARD software in order to validate the proposed homogenization technique. A representative volume element is analyzed with 30 randomly distributed inclusions. Comparisons between the additive tangent Mori–Tanaka scheme and finite element calculations are made for different volume fractions of inclusions, different contrasts in elastic and viscous properties and different strain rates and strain amplitudes. These comparisons demonstrate the efficiency of the proposed homogenization scheme. The effect of isotropization of the viscoplastic tangent stiffness is also investigated. It is concluded that quality of predictions does not benefit from such simplification, contrary to the known result for elastic–plastic case.

Słowa kluczowe:
Elasto-viscoplasticity, Homogenization, Finite element, Composite, Mori–Tanaka scheme

Afiliacje autorów:
Czarnota C. - CNRS (FR)
Kowalczyk-Gajewska K. - IPPT PAN
Salahouelhadj A. - Lorraine University (FR)
Martiny M. - Lorraine University (FR)
Mercier S. - Clermont Université (FR)
40p.

Abstrakty konferencyjne
1.  Czarnota C., Kowalczyk-Gajewska K., Martiny M., Mercier S., Modeling of the cyclic behaviour of elastic viscoplastic composites by an additive tangent Mori Tanaka approach, ESMC 2015, 9th European Solid Mechanics Conference, 2015-07-06/07-10, Leganés-Madrid (ES), pp.#218-1-2, 2015

Streszczenie:
This work deals with the prediction of the macroscopic behavior of two-phase composites, based on the Mori-Tanaka scheme combined with an additive/sequential interaction rule and tangent linearization of viscoplastic response. Cyclic tension compression loadings are considered to further evaluate the approach. The composite is made of spherical inclusions dispersed in a matrix. Both materials have an elastic-visco-plastic behavior. In the second part, finite element calculations are performed using ABAQUS/STANDARD software in order to validate the proposed homogenization technique. A representative volume element is analyzed with 30 randomly distributed inclusions.

Słowa kluczowe:
Multiscale Modeling, Elasto-viscoplasticity, Mori Tanaka Scheme, Composite

Afiliacje autorów:
Czarnota C. - CNRS (FR)
Kowalczyk-Gajewska K. - IPPT PAN
Martiny M. - Lorraine University (FR)
Mercier S. - Clermont Université (FR)

Kategoria A Plus

IPPT PAN

logo ippt            ul. Pawińskiego 5B, 02-106 Warszawa
  +48 22 826 12 81 (centrala)
  +48 22 826 98 15
 

Znajdź nas

mapka
© Instytut Podstawowych Problemów Techniki Polskiej Akademii Nauk 2024