Instytut Podstawowych Problemów Techniki
Polskiej Akademii Nauk

Partnerzy

dr hab. inż. M. Szutkowska

Institute of Advanced Manufacturing Technology (PL)

Abstrakty konferencyjne
1.  Sadowski T., Postek E., Pietras D., Boniecki M., Szutkowska M., Description of quasi-static and dynamic damage processes in 2-phase ceramic matrix and metal matrix composites reinforced by ceramic grains, ACE-X 2021, 14th INTERNATIONAL CONFERENCE ON ADVANCED COMPUTATIONAL ENGINEERING AND EXPERIMENTING - ACE-X 2021, 2021-07-04/07-08, St. Julian's (MT), pp.9-10, 2021

Streszczenie:
Quasi-static degradation of brittle composites exhibits different mechanical responses under uniaxial tension and uniaxial compression. In this paper, we analysed cracking processes and failure under quasi-static loading of 2 phase ceramic material made of alumina and zirconia mixture, subjected to tension and compression. Constitutive modelling of two-phase ceramic composites obeys description of (1) elastic deformations of initially porous material, (2) limited plasticity and (3) cracks initiation and propagation. Modelling of polycrystalline ceramics at the mesoscopic level under mechanical loading is related to the analysis of a set of grains, which create a so-called Representative Volume Element (RVE). The basic elements of the defect structure inside polycrystal are: micro- and meso-cracks, kinked and wing cracks. To get the macroscopic response of the material one can calculate averaged values of stress and strain over the RSE with the application of an analytical approach. The dynamic degradation process was illustrated for 2 phase ceramic matrix composite and cermet, which was subjected to short compressive impulse. The pulse duration was 10-7s and the applied pressure level - 480 MPa. In the proposed, more advanced finite element formulation of the cermet behaviour is was necessary to take into account the following data and phenomena revealing inside of the RVE: (1) spatial distribution of the cermet constituents, (2) system of grain boundaries/binder interfaces modelled by interface elements, (3) rotation of brittle grains. The cermet response due to pulse loading is significantly different in comparison to the quasi-static behaviour, i.e. the stress distributions and microcracking processes are quite different.

Słowa kluczowe:
cermets, dynamic behaviour, brittle cracking

Afiliacje autorów:
Sadowski T. - Lublin University of Technology (PL)
Postek E. - IPPT PAN
Pietras D. - Lublin University of Technology (PL)
Boniecki M. - Institute of Electronic Materials Technology (PL)
Szutkowska M. - Institute of Advanced Manufacturing Technology (PL)
2.  Sadowski T., Postek E., Pietras D., Boniecki M., Szutkowska M., Modelling of Quasi-static and Dynamic Damage Process in Ceramic Matrix Composites, MECHCOMP 2019, 5th International Conference on Mechanics of Composites, 2019-07-01/07-04, Lizbona (PT), pp.80-81, 2019

Streszczenie:
Quasi-static degradation of brittle composites exhibits different mechanical response under uniaxial tension and uniaxial compression. In this paper we analysed cracking processes and failure under quasi-static loading of 2 phase ceramic material made of alumina and zirconia mixture, subjected to tension and compression. Constitutive modelling of two phase ceramic composites obeys description of: (1) elastic deformations of initially porous material, (2) limited plasticity and (3) cracks initiation and propagation. Modelling of polycrystalline ceramics at mesoscopic level under mechanical loading is related to analysis of a set of grains, which create so called Representative Volume Element (RVE). The basic elements of the defect structure inside polycrystal are: micro- and meso-cracks, kinked and wing cracks. To get macroscopic response of the material one can calculate averaged values of stress and strain over the RSE with application of analytical approach. Dynamic degradation process was illustrated for 2 phase ceramic matix composite and cermet, which was subjected to short compressive impulse.
The pulse duration was 10-7s and the applied pressure level - 480 MPa. In the proposed more advanced nite elements formulation of the cermet behaviour is was necessary to take into account the following data and phenomena revealing inside of the RVE: (1) spatial distribution of the cermet constituents, (2) system of grain boundaries/binder interfaces modelled by interface elemnets, (3) rotation of brittle grains. The cermet response due to pulse loading is signifcantly different in comparison to the quasistatic behaviour, i.e. the stress distributions and microcracking processes are quite different.

Słowa kluczowe:
brittle composites, damage, quasi-static behaviour, dynamics, RVE

Afiliacje autorów:
Sadowski T. - Lublin University of Technology (PL)
Postek E. - IPPT PAN
Pietras D. - Lublin University of Technology (PL)
Boniecki M. - Institute of Electronic Materials Technology (PL)
Szutkowska M. - Institute of Advanced Manufacturing Technology (PL)

Kategoria A Plus

IPPT PAN

logo ippt            ul. Pawińskiego 5B, 02-106 Warszawa
  +48 22 826 12 81 (centrala)
  +48 22 826 98 15
 

Znajdź nas

mapka
© Instytut Podstawowych Problemów Techniki Polskiej Akademii Nauk 2024