Instytut Podstawowych Problemów Techniki
Polskiej Akademii Nauk

Partnerzy

Mariana Cristea

Petru Poni Institute of Macromolecular Chemistry (RO)

Ostatnie publikacje
1.  Staszczak M., Urbański L., Cristea M., Ionita D., Pieczyska E.A., Investigation of Shape Memory Polyurethane Properties in Cold Programming Process Towards Its Applications, Polymers, ISSN: 2073-4360, DOI: 10.3390/polym16020219, Vol.16, No.2, pp.219-1-219-20, 2024

Streszczenie:
Thermoresponsive shape memory polymers (SMPs) with the remarkable ability to remember a temporary shape and recover their original one using temperature have been gaining more and more attention in a wide range of applications. Traditionally, SMPs are investigated using a method named often “hot-programming”, since they are heated above their glass transition temperature (Tg) and after that, reshaped and cooled below Tg to achieve and fix the desired configuration. Upon reheating, these materials return to their original shape. However, the heating of SMPs above their Tg during a thermomechanical cycle to trigger a change in their shape creates a temperature gradient within the material structure and causes significant thermal expansion of the polymer sample resulting in a reduction in its shape recovery property. These phenomena, in turn, limit the application fields of SMPs, in which fast actuation, dimensional stability and low thermal expansion coefficient are crucial. This paper aims at a comprehensive experimental investigation of thermoplastic polyurethane shape memory polymer (PU-SMP) using the cold programming approach, in which the deformation of the SMP into the programmed shape is conducted at temperatures below Tg. The PU-SMP glass transition temperature equals approximately 65 ◦C. Structural, mechanical and thermomechanical characterization was performed, and the results on the identification of functional properties of PU-SMPs in quite a large strain range beyond yield limit were obtained. The average shape fixity ratio of the PU-SMP at room temperature programming was found to be approximately 90%, while the average shape fixity ratio at 45 ◦C (Tg − 20 ◦C) was approximately 97%. Whereas, the average shape recovery ratio was 93% at room temperature programming and it was equal to approximately 90% at 45 ◦C. However, the results obtained using the traditional method, the so-called hot programming at 65 ◦C, indicate a higher shape fixity value of 98%, but a lower shape recovery of 90%. Thus, the obtained results confirmed good shape memory properties of the PU-SMPs at a large strain range at various temperatures. Furthermore, the experiments conducted at both temperatures below Tg demonstrated that cold programming can be successfully applied to PU-SMPs with a relatively high Tg. Knowledge of the PU-SMP shape memory and shape fixity properties, estimated without risk of material degradation, caused by heating above Tg, makes them attractive for various applications, e.g., in electronic components, aircraft or aerospace structures.

Słowa kluczowe:
polyurethane shape memory polymer, cold programming, thermal expansion, shape fixity, shape recovery

Afiliacje autorów:
Staszczak M. - IPPT PAN
Urbański L. - IPPT PAN
Cristea M. - Petru Poni Institute of Macromolecular Chemistry (RO)
Ionita D. - inna afiliacja
Pieczyska E.A. - IPPT PAN
100p.
2.  Nabavian Kalat M., Staszczak M., Urbański L., Fernandez C., Vega C., Cristea M., Ionita D., Lantada A., Pieczyska E.A., Investigating a shape memory epoxy resin and its application to engineering shape-morphing devices empowered through kinematic chains and compliant joints, MATERIALS AND DESIGN, ISSN: 0264-1275, DOI: 10.1016/j.matdes.2023.112263, Vol.233, No.112263, pp.1-15, 2023

Streszczenie:
4D printing is the additive manufacturing (3D printing) of objects that can transform their shape in a controlled and predictable way when subjected to external stimuli. A thermo-responsive shape memory polymer (SMP) is a highly suitable material to 4D print smart devices, due to its actuation function and the capability of recovering its original shape from the deformed one upon heating. This study presents the results of employing an epoxy resin in the additive manufacturing of complex-shaped smart devices with shape-morphing properties using laser stereolithography (SLA). To quantify the shape memory behaviour of the shape memory epoxy (SMEp), we first investigate the thermomechanical properties of the 3D-printed specimens in a tensile testing machine coupled with an environmental thermal chamber. This approach allows us to determine the shape fixity and recovery of SMEp. Next, we propose effective designs of complex-shaped devices, with the aim of promoting shape morphing through micro-actuators and compliant joints acting as active regions in combination with multiplying mechanisms or kinematic chains in each of the devices. We manufacture the complex-shaped prototypes by using SLA directly from the computer-aided designs. The shape memory trials of the 3D-printed prototypes reveal quite precise shape recovery of the devices, illustrating their shape-memory. In fact, the inclusion of micro-actuators and compliant joints within the complex-geometry devices allows for local triggering, deformation and recovery, resulting in a prompt response of the devices to heat. Therefore, innovative designs, along with the suitable smart material and high-quality manufacturing process, lead to 4D printed devices with fast actuation and shape-morphing properties. Overall, this research may contribute to the development of smart materials and 4D printing technology for applications in fields such as biomedical engineering, robotics, transport and aerospace engineering

Słowa kluczowe:
Shape memory polymers,Shape memory epoxy,Shape morphing structures,Laser stereolithography,3D and 4D printing

Afiliacje autorów:
Nabavian Kalat M. - IPPT PAN
Staszczak M. - IPPT PAN
Urbański L. - IPPT PAN
Fernandez C. - inna afiliacja
Vega C. - inna afiliacja
Cristea M. - Petru Poni Institute of Macromolecular Chemistry (RO)
Ionita D. - inna afiliacja
Lantada A. - inna afiliacja
Pieczyska E.A. - IPPT PAN
140p.
3.  Pieczyska E.A., Staszczak M., Maj M., Kowalczyk-Gajewska K., Golasiński K.M., Cristea M., Tobushi H., Hayashi S., Investigation of thermomechanical couplings, strain localization and shape memory properties in a shape memory polymer subjected to loading at various strain rates, SMART MATERIALS AND STRUCTURES, ISSN: 0964-1726, DOI: 10.1088/0964-1726/25/8/085002, Vol.25, No.8, pp.085002-1-15, 2016

Streszczenie:
This paper presents experimental and modeling results of the effects of thermomechanical couplings occurring in a polyurethane shape memory polymer (SMP) subjected to tension at various strain rates within large strains. The SMP mechanical curves, recorded using a testing machine, and the related temperature changes, measured in a contactless manner using an IR camera, were used to investigate the polymer deformation process at various loading stages. The effects of thermomechanical couplings allowed the determination of the material yield point in the initial loading stage, the investigation of nucleation and development of the strain localization at larger strains and the estimation of the effects of thermoelastic behavior during the unloading process. The obtained stress–strain and thermal characteristics, the results of the dynamic mechanical analysis and estimated values of the shape fixity and shape recovery parameters confirmed that the shape memory polymer (T g = 45°C) is characterized by good mechanical and shape memory properties, as well as high sensitivity to the strain rate. The mechanical response of the SMP subjected to tension was simulated using the finite element method and applying the large strain, two-phase model. Strain localization observed in the experiment was well reproduced in simulations and the temperature spots were correlated with the accumulated viscoplastic deformation of the SMP glassy phase.

Słowa kluczowe:
shape memory polymer, thermomechanical coupling, infrared camera, tension test, strain rate, strain localization, constitutive model

Afiliacje autorów:
Pieczyska E.A. - IPPT PAN
Staszczak M. - IPPT PAN
Maj M. - IPPT PAN
Kowalczyk-Gajewska K. - IPPT PAN
Golasiński K.M. - IPPT PAN
Cristea M. - Petru Poni Institute of Macromolecular Chemistry (RO)
Tobushi H. - Aichi Institute of Technology (JP)
Hayashi S. - SMP Technologies Inc. (JP)
40p.
4.  Pieczyska E.A., Maj M., Kowalczyk-Gajewska K., Staszczak M., Gradys A., Majewski M., Cristea M., Tobushi H., Hayashi S., Thermomechanical properties of polyurethane shape memory polymer–experiment and modelling, SMART MATERIALS AND STRUCTURES, ISSN: 0964-1726, DOI: 10.1088/0964-1726/24/4/045043, Vol.24, pp.045043-1-16, 2015

Streszczenie:
In this paper extensive research on the polyurethane shape memory polymer (PU-SMP) is reported, including its structure analysis, our experimental investigation of its thermomechanical properties and its modelling. The influence of the effects of thermomechanical couplings on the SMP behaviour during tension at room temperature is studied using a fast and sensitive infrared camera. It is shown that the thermomechanical behaviour of the SMP significantly depends on the strain rate: at a higher strain rate higher stress and temperature values are obtained. This indicates that an increase of the strain rate leads to activation of different deformation mechanisms at the micro-scale, along with reorientation and alignment of the molecular chains. Furthermore, influence of temperature on the SMP's mechanical behaviour is studied. It is observed during the loading in a thermal chamber that at the temperature 20°C below the glass transition temperature (Tg) the PU-SMP strengthens about six times compared to the material above Tg but does not exhibit the shape recovery. A finite-strain constitutive model is formulated, where the SMP is described as a two-phase material composed of a hyperelastic rubbery phase and elastic-viscoplastic glassy phase. The volume content of phases is governed by the current temperature. Finally, model predictions are compared with the experimental results.

Słowa kluczowe:
shape memory polyurethane, thermomechanical couplings, infrared camera, temperature change, dynamic mechanical analysis, strain rate, constitutive model

Afiliacje autorów:
Pieczyska E.A. - IPPT PAN
Maj M. - IPPT PAN
Kowalczyk-Gajewska K. - IPPT PAN
Staszczak M. - IPPT PAN
Gradys A. - IPPT PAN
Majewski M. - IPPT PAN
Cristea M. - Petru Poni Institute of Macromolecular Chemistry (RO)
Tobushi H. - Aichi Institute of Technology (JP)
Hayashi S. - SMP Technologies Inc. (JP)
40p.
5.  Pieczyska E.A., Maj M., Kowalczyk-Gajewska K., Staszczak M., Urbański L., Tobushi H., Hayashi S., Cristea M., Mechanical and Infrared Thermography Analysis of Shape Memory Polyurethane, Journal of Materials Engineering and Performance, ISSN: 1059-9495, DOI: 10.1007/s11665-014-0963-2, Vol.23, No.7, pp.2553-2560, 2014

Streszczenie:
Multifunctional new material—polyurethane shape memory polymer (PU-SMP)—was subjected to tension carried out at room temperature at various strain rates. The influence of effects of thermomechanical couplings on the SMP mechanical properties was studied, based on the sample temperature changes, measured by a fast and sensitive infrared camera. It was found that the polymer deformation process strongly depends on the strain rate applied. The initial reversible strain is accompanied by a small drop in temperature, called thermoelastic effect. Its maximal value is related to the SMP yield point and increases upon increase of the strain rate. At higher strains, the stress and temperature significantly increase, caused by reorientation of the polymer molecular chains, followed by the stress drop and its subsequent increase accompanying the sample rupture. The higher strain rate, the higher stress, and temperature changes were obtained, since the deformation process was more dynamic and has occurred in almost adiabatic conditions. The constitutive model of SMP valid in finite strain regime was developed. In the proposed approach, SMP is described as a two-phase material composed of hyperelastic rubbery phase and elastic-viscoplastic glassy phase, while the volume content of phases is specified by the current temperature.

Słowa kluczowe:
constitutive model, dynamic mechanical analysis, shape memory polyurethane, strain rate, temperature change, thermomechanical couplings

Afiliacje autorów:
Pieczyska E.A. - IPPT PAN
Maj M. - IPPT PAN
Kowalczyk-Gajewska K. - IPPT PAN
Staszczak M. - IPPT PAN
Urbański L. - IPPT PAN
Tobushi H. - Aichi Institute of Technology (JP)
Hayashi S. - SMP Technologies Inc. (JP)
Cristea M. - Petru Poni Institute of Macromolecular Chemistry (RO)
20p.

Prace konferencyjne
1.  Pieczyska E.A., Staszczak M., Maj M., Kowalczyk-Gajewska K., Cristea M., Tobushi H., Hayashi S., Thermomechanical analysis of shape memory polyurethane PU-SMP, 6th International Conference on Mechanics and Materials in Design, 2015-07-26/07-30, Ponta Delgada (PT), pp.783-786, 2015

Streszczenie:
Experimental results of effects of thermomechanical couplings occurring in polyurethane shape memory polymer (PU-SMP) during tension at different strain rates are presented. Stress-strain curves were recorded by MTS 858 testing machine. The temperature changes were estimated by using a fast and sensitive infrared camera (Phoenix FLIR IR System). The stress and temperature vs. strain characteristics obtained during the tension enable to investigate the SMP deformation process and distinguish 3 different stages: the first, accompanied by a drop in temperature called thermoelastic effect, related to a limit of the material reversible deformation, the second plastic stage, associated with change of the material structure and significant increase in temperature, and the third - related to the mechanisms of damage - a breaking of the polymer chains, leading to the specimen rupture.

Słowa kluczowe:
shape memory polymer, thermomechanical coupling, tension, infrared camera

Afiliacje autorów:
Pieczyska E.A. - IPPT PAN
Staszczak M. - IPPT PAN
Maj M. - IPPT PAN
Kowalczyk-Gajewska K. - IPPT PAN
Cristea M. - Petru Poni Institute of Macromolecular Chemistry (RO)
Tobushi H. - Aichi Institute of Technology (JP)
Hayashi S. - SMP Technologies Inc. (JP)
15p.
2.  Staszczak M., Pieczyska E.A., Maj M., Kowalczyk-Gajewska K., Cristea M., Tobushi H., Hayashi S., Mechanical and infrared thermography analysis of shape memory polymer - focus on thermoelastic effect, QIRT 2014, 12th International Conference on Quantitative Infrared Thermography, 2014-07-07/07-11, Bordeaux (FR), pp.183-1-9, 2014

Streszczenie:
Experimental results of effects of thermomechanical couplings occurring in polyurethane shape memory polymer (PU-SMP) subjected to cyclic loading at, are presented. Stress-strain characteristics were recorded by the testing machine, whereas the specimen temperature changes were measured by a fast and sensitive infrared camera. The influence of strain rate on the polymer thermomechanical behaviour is studied. It was found that PU-SMP is very sensitive to the strain rate. The higher the strain rate, the higher the values of stress and temperature changes were obtained. In the initial stage of deformation a drop in temperature called thermoelastic effect was recorded determining a limit of the material reversible deformation.

Słowa kluczowe:
thermomechanical couplings, polyurethane shape memory polymer, cyclic loading, different strain rates, infrared camera, thermoelastic effect

Afiliacje autorów:
Staszczak M. - IPPT PAN
Pieczyska E.A. - IPPT PAN
Maj M. - IPPT PAN
Kowalczyk-Gajewska K. - IPPT PAN
Cristea M. - Petru Poni Institute of Macromolecular Chemistry (RO)
Tobushi H. - Aichi Institute of Technology (JP)
Hayashi S. - SMP Technologies Inc. (JP)

Abstrakty konferencyjne
1.  Staszczak M., Nabavian Kalat M., Urbański L., Cristea M., Pieczyska E.A., INFLUENCE OF STRAIN RATE AND COOLING RATE ON THE MECHANICAL BEHAVIOUR SHAPE MEMORY POLYURETHANE WITH Tg = 65 °C, ICEM, 19th International Conference on Experimental Mechanics, 2022-07-17/07-21, Kraków (PL), pp.280-281, 2022
2.  Cristea M., Ionita D., Pieczyska E.A., DYNAMIC MECHANICAL ANALYSIS IN INVESTIGATIONS OF SMART MATERIALS: A POLYMER CHEMIST THINKING, ICEM, 19th International Conference on Experimental Mechanics, 2022-07-17/07-21, Kraków (PL), pp.266-267, 2022
3.  Cristea M., Ionita D., Oprea S., Pieczyska E.A., How loading type affects viscoelastic response in polyurethane structures, SolMech 2018, 41st SOLID MECHANICS CONFERENCE, 2018-08-27/08-31, Warszawa (PL), pp.342-343, 2018
4.  Golasiński K.M., Pieczyska E.A., Staszczak M., Cristea M., Experimental investigation of thermomechanical properties of multifunctional materials at IPPT PAN, MACRO Iasi, The XXVI-th Symposium PROGRESS IN ORGANIC AND POLYMER CHEMISTRY, 2017-10-05/10-06, Jassy (RO), pp.1-1, 2017
5.  Staszczak M., Pieczyska E.A., Maj M., Kowalczyk-Gajewska K., Cristea M., Tobushi H., Hayashi S., Shape memory polymer – shape fixity and recovery in cyclic loading, PCM-CMM 2015, 3rd Polish Congress of Mechanics and 21st Computer Methods in Mechanics, 2015-09-08/09-11, Gdańsk (PL), pp.147-148, 2015

Streszczenie:
The paper concerns investigation of polyurethane shape memory polymer (SMP) properties. Shape fixity and shape recovery, important parameters for the SMP applications, were quantitatively estimated in thermomechanical cyclic loading; three subsequent thermomechanical loading cycles were performed. It was observed that the shape fixity is proper and does not depend on the cycle number. The obtained mean values of shape fixity parameters are 97-98 %. Although the shape recovery is poor (=83 %) in the first cycle of the thermomechanical loading, it is excellent in the subsequent cycles (=99-100 %). The evaluated parameters confirm good shape memory properties of the SMP.

Słowa kluczowe:
Shape memory polyurethane, shape fixity, shape recovery, thermomechanical loading, cyclic loading

Afiliacje autorów:
Staszczak M. - IPPT PAN
Pieczyska E.A. - IPPT PAN
Maj M. - IPPT PAN
Kowalczyk-Gajewska K. - IPPT PAN
Cristea M. - Petru Poni Institute of Macromolecular Chemistry (RO)
Tobushi H. - Aichi Institute of Technology (JP)
Hayashi S. - SMP Technologies Inc. (JP)
6.  Kukla D., Staszczak M., Pieczyska E.A., Heljak M., Szlązak K., Święszkowski W., Cristea M., Tobushi H., Hayashi S., Evaluation of the properties of polymeric foams with shape memory under load, PCM-CMM 2015, 3rd Polish Congress of Mechanics and 21st Computer Methods in Mechanics, 2015-09-08/09-11, Gdańsk (PL), pp.143-144, 2015

Streszczenie:
The paper presents the results of experimental investigation on polymer foam with shape memory properties. The research is focused on characterization of the microstructure of the foam and understanding the mechanisms of deformation under static and dynamic loading. Up till now, selected experimental techniques have been applied. Dynamic Mechanical Analysis (DMA) allows determining the extent of the value of the glass transition temperature under different load conditions, which also reveals the transformation temperature range for the SMP foam. Scanning electron microscopy (SEM) shows the foam microstructure in various scales, while X-ray tomography gave 3D microstructure results presenting in addition mechanism of the cells deformation and changes in their geometry under 30 % and 50% strain. BOSE system enables obtaining the results on dynamic loading.

Słowa kluczowe:
Shape memory polymer foam, Dynamic mechanical analysis, Glass transition temperature, X-ray tomography

Afiliacje autorów:
Kukla D. - IPPT PAN
Staszczak M. - IPPT PAN
Pieczyska E.A. - IPPT PAN
Heljak M. - Politechnika Warszawska (PL)
Szlązak K. - inna afiliacja
Święszkowski W. - inna afiliacja
Cristea M. - Petru Poni Institute of Macromolecular Chemistry (RO)
Tobushi H. - Aichi Institute of Technology (JP)
Hayashi S. - SMP Technologies Inc. (JP)
7.  Staszczak M., Pieczyska E.A., Maj M., Kowalczyk-Gajewska K., Cristea M., Tobushi H., Hayashi S., Estimation of shape fixity and shape recovery – crucial parameters for shape memory polymer applications, SolMech 2014, 39th Solid Mechanics Conference, 2014-09-01/09-05, Zakopane (PL), pp.267-268, 2014

Streszczenie:
Shape memory polymers (SMP) are new unique and attractive materials which demonstrate shape memory properties. It means that the materials, as a result of an external stimulus such as temperature, can recover their original (permanent) shape from deformed (temporary) shape. The mechanical characteristics of SMP, e.g. the elastic modulus and the yield stress, change significantly below and above their glass transition temperature Tg. It can be explained by differences of molecular motion of the polymer chains below and above Tg [1, 2]. Two phenomena due to this can be observed in the SMP. The first one is a shape fixity which means that it is possible to fix a temporary shape by cooling the deformed SMP below Tg. The second phenomenon, called a shape recovery, denotes the property that the original shape, changed due to deformation, is recovered during subsequent heating above the SMP Tg temperature. Preliminary estimation of these two parameters, crucial to assess SMP potential applications, is the subject of this paper [1].

Słowa kluczowe:
Shape memory polymers, elastic modulus, yield stress, glass transition temperature, shape fixity, shape recovery

Afiliacje autorów:
Staszczak M. - IPPT PAN
Pieczyska E.A. - IPPT PAN
Maj M. - IPPT PAN
Kowalczyk-Gajewska K. - IPPT PAN
Cristea M. - Petru Poni Institute of Macromolecular Chemistry (RO)
Tobushi H. - Aichi Institute of Technology (JP)
Hayashi S. - SMP Technologies Inc. (JP)
8.  Kowalczyk-Gajewska K., Pieczyska E.A., Maj M., Staszczak M., Majewski M., Cristea M., Tobushi H., Two-phase model of shape memory polymers at finite strains: formulation and experimental verification, SolMech 2014, 39th Solid Mechanics Conference, 2014-09-01/09-05, Zakopane (PL), pp.259-260, 2014

Streszczenie:
A constitutive model of SMP, formulated at large strain format, is developed. SMP is described as a two-phase material composed of a soft rubbery phase and a hard glassy phase. The volume fraction of each phase is postulated as a logistic function of temperature. Identification of model parameters has been performed using the experimental tensile loading-unloading tests with different strain rates conducted at thermal chamber at different temperatures.

Słowa kluczowe:
shape-memory polymers, two-phase model, large strain framework

Afiliacje autorów:
Kowalczyk-Gajewska K. - IPPT PAN
Pieczyska E.A. - IPPT PAN
Maj M. - IPPT PAN
Staszczak M. - IPPT PAN
Majewski M. - IPPT PAN
Cristea M. - Petru Poni Institute of Macromolecular Chemistry (RO)
Tobushi H. - Aichi Institute of Technology (JP)
9.  Pieczyska E.A., Maj M., Kowalczyk-Gajewska K., Staszczak M., Tobushi H., Hayashi S., Cristea M., Thermomechanical analysis of shape memory polymer under cyclic loading and relaxation conditions, ICEM-16, 16th International Conference on Experimental Mechanics, 2014-07-07/07-11, Cambridge (GB), pp.1-2, 2014

Streszczenie:
Experimental evaluation and modeling of a new polyurethane shape memory polymer (SMP) subjected to cyclic tension and stress-relaxation tests are presented. The influence of effects of thermomechanical couplings on the SMP thermomechanical behaviour for various strain rates was studied, basing on the sample temperature changes measured by a fast and sensitive infrared camera. The constitutive model valid in finite strain regime was developed following [5]. In the proposed approach SMP is described as a two-phase material composed of hyperelastic rubbery phase and elastic-viscoplastic glassy phase while the volume content of phases is specified by the current temperature.

Słowa kluczowe:
Experimental evaluation, constitutive modeling, polyurethane shape memory polymer, cyclic tension, stress-relaxation tests, effects of thermomechanical couplings, thermomechanical behaviour, various strain rates, temperature changes, sensitive infrared camera, hyperelastic rubbery phase, elastic-viscoplastic glassy phase

Afiliacje autorów:
Pieczyska E.A. - IPPT PAN
Maj M. - IPPT PAN
Kowalczyk-Gajewska K. - IPPT PAN
Staszczak M. - IPPT PAN
Tobushi H. - Aichi Institute of Technology (JP)
Hayashi S. - SMP Technologies Inc. (JP)
Cristea M. - Petru Poni Institute of Macromolecular Chemistry (RO)
10.  Pieczyska E.A., Tobushi H., Hayashi S., Maj M., Kowalczyk-Gajewska K., Staszczak M., Cristea M., Thermomechanical Analysis of Shape Memory Polyurethane, 4th Integrity, Reliability and Failure of Mechanical Systems, 2013-06-23/06-27, Funchal (PT), pp.1-2, 2013

Streszczenie:
This paper presents experimental evaluation of a new polyurethane shape memory polymer (PU-SMP) produced by SMP Technologies Inc. It discusses mechanical characteristics and temperature changes of the SMP specimens subjected to tension test performed at room temperature with various strain rates. Basing on the mechanical data and the relevant temperature changes, we have studied the thermomechanical properties of the PU-SMP and influence of the strain rate on the strain localization behavior. Finally, we have identified the material parameters for the one-dimensional rheological model of the SMP.

Słowa kluczowe:
shape memory polyurethane, tension test, dynamic mechanical analysis, infrared camera, temperature change, thermomechanical properties, rheological model

Afiliacje autorów:
Pieczyska E.A. - IPPT PAN
Tobushi H. - Aichi Institute of Technology (JP)
Hayashi S. - SMP Technologies Inc. (JP)
Maj M. - IPPT PAN
Kowalczyk-Gajewska K. - IPPT PAN
Staszczak M. - IPPT PAN
Cristea M. - Petru Poni Institute of Macromolecular Chemistry (RO)

Kategoria A Plus

IPPT PAN

logo ippt            ul. Pawińskiego 5B, 02-106 Warszawa
  +48 22 826 12 81 (centrala)
  +48 22 826 98 15
 

Znajdź nas

mapka
© Instytut Podstawowych Problemów Techniki Polskiej Akademii Nauk 2024