Instytut Podstawowych Problemów Techniki
Polskiej Akademii Nauk

Partnerzy

Monika Wasyłeczko

Nałęcz Institute of Biocybernetics and Biomedical Engineering, Polish Academy of Sciences (PL)

Ostatnie publikacje
1.  Wasyłeczko M., Remiszewska E., Sikorska W., Dulnik J., Chwojnowski A., Scaffolds for Cartilage Tissue Engineering from a Blend of Polyethersulfone and Polyurethane Polymers, Molecules, ISSN: 1420-3049, DOI: 10.3390/molecules28073195, Vol.28, No.7, pp.3195-1-28, 2023

Streszczenie:
In recent years, one of the main goals of cartilage tissue engineering has been to find appropriate scaffolds for hyaline cartilage regeneration, which could serve as a matrix for chondrocytes or stem cell cultures. The study presents three types of scaffolds obtained from a blend of polyethersulfone (PES) and polyurethane (PUR) by a combination of wet-phase inversion and salt-leaching methods. The nonwovens made of gelatin and sodium chloride (NaCl) were used as precursors of macropores. Thus, obtained membranes were characterized by a suitable structure. The top layers were perforated, with pores over 20 µm, which allows cells to enter the membrane. The use of a nonwoven made it possible to develop a three-dimensional network of interconnected macropores that is required for cell activity and mobility. Examination of wettability (contact angle, swelling ratio) showed a hydrophilic nature of scaffolds. The mechanical test showed that the scaffolds were suitable for knee joint applications (stress above 10 MPa). Next, the scaffolds underwent a degradation study in simulated body fluid (SBF). Weight loss after four weeks and changes in structure were assessed using scanning electron microscopy (SEM) and MeMoExplorer Software, a program that estimates the size of pores. The porosity measurements after degradation confirmed an increase in pore size, as expected. Hydrolysis was confirmed by Fourier-transform infrared spectroscopy (FT-IR) analysis, where the disappearance of ester bonds at about 1730 cm −1 wavelength is noticeable after degradation. The obtained results showed that the scaffolds meet the requirements for cartilage tissue engineering membranes and should undergo further testing on an animal model.

Słowa kluczowe:
articular cartilage, cartilage tissue engineering, hydrolysis process, materials for scaffolds, partly degradable scaffolds, polyethersulfone–polyurethane scaffolds, polyurethane degradation, regenerative medicine, scaffold requirements, tissue engineering

Afiliacje autorów:
Wasyłeczko M. - Nałęcz Institute of Biocybernetics and Biomedical Engineering, Polish Academy of Sciences (PL)
Remiszewska E. - inna afiliacja
Sikorska W. - Nałęcz Institute of Biocybernetics and Biomedical Engineering, Polish Academy of Sciences (PL)
Dulnik J. - IPPT PAN
Chwojnowski A. - Nałęcz Institute of Biocybernetics and Biomedical Engineering, Polish Academy of Sciences (PL)
140p.
2.  Wasyłeczko M., Krysiak Z.J., Łukowska E., Gruba M., Sikorska W., Kruk A., Dulnik J., Czubak J., Chwojnowski A., Three-dimensional scaffolds for bioengineering of cartilage tissue, Biocybernetics and Biomedical Engineering, ISSN: 0208-5216, DOI: 10.1016/j.bbe.2022.03.004, Vol.42, No.2, pp.494-511, 2022

Streszczenie:
The cartilage tissue is neither supplied with blood nor innervated, so it cannot heal by itself. Thus, its reconstruction is highly challenging and requires external support. Cartilage diseases are becoming more common due to the aging population and obesity. Among young people, it is usually a post-traumatic complication. Slight cartilage damage leads to the spontaneous formation of fibrous tissue, not resistant to abrasion and stress, resulting in cartilage degradation and the progression of the disease. For these reasons, cartilage regeneration requires further research, including use of new type of biomaterials for scaffolds. This paper shows cartilage characteristics within its most frequent problems and treatment strategies, including a promising method that combines scaffolds and human cells. Structure and material requirements, manufacturing methods, and commercially available scaffolds were described. Also, the comparison of poly(L-lactide) (PLLA) and polyethersulfone (PES) 3D membranes obtained by a phase inversion method using nonwovens as a pore-forming additives were reported. The scaffolds' structure and the growth ability of human chondrocytes were compared. Scaffolds' structure, cells morphology, and protein presence in the membranes were examined with a scanning electron microscope. The metabolic activity of cells was tested with the MTT assay. The structure of the scaffolds and the growth capacity of human chondrocytes were compared. Obtained results showed higher cell activity and protein content for PES scaffolds than for PLLA. The PES membrane had better mechanical properties (e.g. ripping), greater chondrocytes proliferation, and thus a better secretion of proteins which build up the cartilage structure.

Słowa kluczowe:
3D-scaffolds, membrane structure, polyethersulfone, poly(L-lactide), chondrocyte culture, cartilage regeneration

Afiliacje autorów:
Wasyłeczko M. - Nałęcz Institute of Biocybernetics and Biomedical Engineering, Polish Academy of Sciences (PL)
Krysiak Z.J. - inna afiliacja
Łukowska E. - Nałęcz Institute of Biocybernetics and Biomedical Engineering, Polish Academy of Sciences (PL)
Gruba M. - Gruca Orthopedic and Trauma Teaching Hospital, Centre of Postgraduate Medical Education (PL)
Sikorska W. - Nałęcz Institute of Biocybernetics and Biomedical Engineering, Polish Academy of Sciences (PL)
Kruk A. - Politechnika Warszawska (PL)
Dulnik J. - IPPT PAN
Czubak J. - Gruca Orthopedic and Trauma Teaching Hospital, Centre of Postgraduate Medical Education (PL)
Chwojnowski A. - Nałęcz Institute of Biocybernetics and Biomedical Engineering, Polish Academy of Sciences (PL)
140p.

Kategoria A Plus

IPPT PAN

logo ippt            ul. Pawińskiego 5B, 02-106 Warszawa
  +48 22 826 12 81 (centrala)
  +48 22 826 98 15
 

Znajdź nas

mapka
© Instytut Podstawowych Problemów Techniki Polskiej Akademii Nauk 2024