Instytut Podstawowych Problemów Techniki
Polskiej Akademii Nauk

Partnerzy

N. Radek


Ostatnie publikacje
1.  Haponova O., Tarelnyk Viacheslav B., Antoszewski B., Radek N., Tarelnyk Nataliia V., Kurp P., Myslyvchenko Oleksandr M., Hoffman J., Technological Features for Controlling Steel Part Quality Parameters by the Method of Electrospark Alloying Using Carburezer Containing Nitrogen—Carbon Components, Materials, ISSN: 1996-1944, DOI: 10.3390/ma15176085, Vol.15, No.6085, pp.1-14, 2022

Streszczenie:
A new method of surface modification based on the method of electrospark alloying (ESA) using carburizer containing nitrogen—carbon components for producing coatings is considered. New processes have been proposed that include the step of applying saturating media in the form of paste-like nitrogenous and nitrogenous-carbon components, respectively, onto the surface without waiting for those media to dry, conducting the ESA process with the use of a steel electrode-tool, as well as with a graphite electrode-tool. Before applying the saturating media, an aluminium layer is applied onto the surface with the use of the ESA method at a discharge energy of Wp = 0.13–6.80 J. A saturating medium in the form of a paste was applied to the surfaces of specimens of steel C22 and steel C40. During nitriding, nitrocarburizing and carburization by ESA (CESA) processes, with an increase in the discharge energy (Wp), the thickness, micro hardness and continuity of the “white layer” coatings, as well as the magnitude of the surface roughness, increase due to saturation of the steel surface with nitrogen and/or carbon, high cooling rates, formation of non-equilibrium structures, formation of special phases, etc. In the course of nitriding, nitrocarburizing and CESA processing of steels C22 and C40, preliminary processing with the use of the ESA method by aluminum increases the thickness, microhardness and continuity of the “white layer”, while the roughness changes insignificantly. Analysis of the phase composition indicates that the presence of the aluminum sublayer leads to the formation of the aluminum-containing phases, resulting in a significant increase in the hardness and, in addition, in an increase in the thickness and quality of the surface layers. The proposed methods can be used to strengthen the surface layers of the critical parts and their elements for compressor and pumping equipment

Słowa kluczowe:
electrospark alloying,coatings,roughness,structure,microhardness,continuity,X-ray diffraction analysis,nitriding,nitrocarburizing,carburization

Afiliacje autorów:
Haponova O. - IPPT PAN
Tarelnyk Viacheslav B. - Sumy National Agrarian University (UA)
Antoszewski B. - Kielce University of Technology (PL)
Radek N. - inna afiliacja
Tarelnyk Nataliia V. - Sumy National Agrarian University (UA)
Kurp P. - Kielce University of Technology (PL)
Myslyvchenko Oleksandr M. - I. M. Frantsevich Institute for Problems in Materials (UA)
Hoffman J. - IPPT PAN
140p.
2.  Radziejewska J., Radek N., Odporność na zużycie ścierne warstw wytwarzanych metodą laserowo-mechaniczną, IM INŻYNIERIA MASZYN, ISSN: 1426-708X, Vol.16, No.4, pp.43-51, 2012

Streszczenie:
W pracy przedstawiono wyniki badań mikrostruktury materiału i odporności na zużycie ścierne warstw Stellitu wytworzonych metodą: natrysku plazmowego, stopowania laserowego oraz poprzez obróbkę hybrydowa łączącą proces stopowania laserowego z nagniataniem powierzchniowym. Obróbkę laserowo – mechaniczną przeprowadzono dla przypadku laserowego stopowania stali 0N18N9 Stellitem 6. Do procesu stopowania wykorzystano ciągłą wiązkę laserową CO2 o mocy 2 kW, nagniatanie powierzchniowe – mikro-młoteczkowanie prowadzono jednocześnie z modyfikacją laserową w podwyższonej temperaturze. Mikrostrukturę materiału analizowano na mikroskopie optycznym oraz na SEM. Określono wielkość strefy przetopionej, stopień zgniotu powierzchniowego. Do badań odporności na zużycie ścierne wykorzystano tester tribologiczny T - 01M typu trzpień - tarcza. Stwierdzono dobrą odporność na zużycie warstw po obróbce hybrydowej

Afiliacje autorów:
Radziejewska J. - IPPT PAN
Radek N. - inna afiliacja
4p.

Kategoria A Plus

IPPT PAN

logo ippt            ul. Pawińskiego 5B, 02-106 Warszawa
  +48 22 826 12 81 (centrala)
  +48 22 826 98 15
 

Znajdź nas

mapka
© Instytut Podstawowych Problemów Techniki Polskiej Akademii Nauk 2024