Instytut Podstawowych Problemów Techniki
Polskiej Akademii Nauk

Partnerzy

Xin Yuan

Imperial College London (GB)

Ostatnie publikacje
1.  Kopeć M., Kukla D., Yuan X., Rejmer W., Kowalewski Z.L., Senderowski C., Aluminide thermal barrier coating for high temperature performance of MAR 247 nickel based superalloy, Coatings, ISSN: 2079-6412, DOI: 10.3390/coatings11010048, Vol.11, No.1, pp.48-1-12, 2021

Streszczenie:
In this paper, mechanical properties of the as-received and aluminide layer coated MAR 247 nickel based superalloy were examined through creep and fatigue tests. The aluminide layer of 20 µm was obtained through the chemical vapor deposition (CVD) process in the hydrogen protective atmosphere for 8 h at the temperature of 1040 °C and internal pressure of 150 mbar. A microstructure of the layer was characterized using the scanning electron microscopy (SEM) and X-ray Energy Dispersive Spectroscopy (EDS). It was found that aluminide coating improve the high temperature fatigue performance of MAR247 nickel based superalloy at 900 °C significantly. The coated MAR 247 nickel based superalloy was characterized by the stress amplitude response ranging from 350 MPa to 520 MPa, which is twice as large as that for the uncoated alloy.

Słowa kluczowe:
chemical vapor deposition, nickel alloys, aluminide coatings, high temperature fatigue, creep

Afiliacje autorów:
Kopeć M. - IPPT PAN
Kukla D. - IPPT PAN
Yuan X. - Imperial College London (GB)
Rejmer W. - inna afiliacja
Kowalewski Z.L. - IPPT PAN
Senderowski C. - inna afiliacja
100p.

Abstrakty konferencyjne
1.  Kopeć M., Yuan X., Wang K., Wang L., Kowalewski Z.L., Microstructure and damage evolution of Ti6Al4V under fast forming conditions, BSSM, 15th International Conference on Advances in Experimental Mechanics, 2021-09-07/09-09, Swansea (GB), pp.1-2, 2021

Streszczenie:
The paper aims to investigate the nature of fracture behaviour through the microstructural and damage evolution analysis of a titanium alloy (Ti6Al4V) with tailored initial microstructures under FAST conditions. High-temperature uniaxial tensile tests with varying heating rates (4°C/s and 100°C/s) and temperatures (900 - 950°C) were conducted to study the effects of heating parameters on the formability and damage of the material. The microstructure and fracture morphology after high-temperature uniaxial tensile tests were characterised to reveal the evolution mechanisms of elongation and damage. It was found, that fast heating could restrain the phase transformation of α to β during the heating and therefore improve the formability of the Ti6Al4V titanium alloy under hot stamping condition.

Słowa kluczowe:
Ti6Al4V, hot stamping, fracture behaviour, damage evolution

Afiliacje autorów:
Kopeć M. - IPPT PAN
Yuan X. - Imperial College London (GB)
Wang K. - Imperial College London (GB)
Wang L. - Imperial College London (GB)
Kowalewski Z.L. - IPPT PAN
2.  Kopeć M., Wang K., Yuan X., Wang L., Kowalewski Z.L., A novel fast light alloys stamping technology (FAST) for complex titanium alloy components, 5th National Scientific Conference Science and Young Researchers, 2021-06-05/06-05, Łódź (PL), pp.1, 2021
3.  Kopeć M., Wang K., Yuan X., Wang L., Kowalewski Z.L., Fast light alloys stamping technology (FAST) for two-phase titanium alloys, PGEM, The Sixth Postgraduate Experimental Mechanics Conference, 2020-12-03/12-04, Manchester (GB), pp.1, 2020

Kategoria A Plus

IPPT PAN

logo ippt            ul. Pawińskiego 5B, 02-106 Warszawa
  +48 22 826 12 81 (centrala)
  +48 22 826 98 15
 

Znajdź nas

mapka
© Instytut Podstawowych Problemów Techniki Polskiej Akademii Nauk 2024