Instytut Podstawowych Problemów Techniki
Polskiej Akademii Nauk

Partnerzy

Aleksandra Kruk

Warsaw University of Technology (PL)


Ostatnie publikacje
1.  Gadomska‐Gajadhur A., Kruk A., Ruśkowski P., Sajkiewicz P., Dulnik J., Chwojnowski A., Original method of imprinting pores in scaffolds for tissue engineering, Polymers for Advanced Technologies, ISSN: 1042-7147, DOI: 10.1002/pat.5091, pp.1-13, 2020

Streszczenie:
Results of the preparation of biodegradable porous scaffolds using an original modification of a wet phase inversion method were presented. Influence of gelatin non‐woven as a non‐classic pore precursor and polyvinylpyrrolidone, Pluronic as classic pore precursors on the structure of obtained scaffolds was analyzed. It was shown that the addition of gelatin non‐wovens enables the preparation of scaffolds, which allow for the growth of cells (size, distribution, and shape of pores). Mechanical properties of the obtained cell scaffolds were determined. The influence of pore precursors on mass absorption of scaffolds against isopropanol and plasma was investigated. Interaction of scaffolds with a T‐lymphocyte line (Jurkat) and with fibroblasts (L929) was investigated. Obtained scaffolds are not cytotoxic and can be used as implants, for example, the regeneration of cartilage tissue.

Słowa kluczowe:
cell cultures, cytotoxic, fibroblasts, imprinted scaffolds

Afiliacje autorów:
Gadomska‐Gajadhur A. - inna afiliacja
Kruk A. - Warsaw University of Technology (PL)
Ruśkowski P. - Warsaw University of Technology (PL)
Sajkiewicz P. - IPPT PAN
Dulnik J. - IPPT PAN
Chwojnowski A. - Nałęcz Institute of Biocybernetics and Biomedical Engineering, Polish Academy of Sciences (PL)
70p.
2.  Kruk A., Gadomska-Gajadhur A., Dulnik J., Ruśkowski P., The influence of the molecular weight of polymer on the morphology, functional properties and L929 fibroblasts growth on polylactide membranes for tissue engineering, International Journal of Polymeric Materials and Polymeric Biomaterials, ISSN: 0091-4037, DOI: 10.1080/00914037.2020.1798440, pp.1-13, 2020

Streszczenie:
The main goal of tissue engineering (TE) is supporting the regeneration of damaged tissues that are difficult to regenerate. The experimental results of the preparation of semi-permeable membranes for cell cultures are presented. The effect of the PLA molecular weight and addition of pore precursors on the morphology of the membranes was studied. The pore precursor of choice was polyvinylpyrrolidone (PVP). It was found that semi-permeable membranes for application in tissue engineering can be prepared with polylactides of molecular weight more significant than 37,000 g/mol. Moreover, it was observed that the growth of the molecular weight of the polymer, the porosity, the size of the pores, the Young modulus and maximum tensile increased. Additionally, to obtain a better morphology of the membranes, PVP should be added to the polymeric solution. Positive growth of L929 fibroblast cells on the obtained scaffolds was shown.

Słowa kluczowe:
biodegradable polymers, cell cultures, L929 fibroblasts, polylactide, scaffolds, tissue engineering

Afiliacje autorów:
Kruk A. - Warsaw University of Technology (PL)
Gadomska-Gajadhur A. - Nałęcz Institute of Biocybernetics and Biomedical Engineering, Polish Academy of Sciences (PL)
Dulnik J. - IPPT PAN
Ruśkowski P. - Warsaw University of Technology (PL)
70p.
3.  Gadomska‐Gajadhur A., Kruk A., Dulnik J., Chwojnowski A., New polyester biodegradable scaffolds for chondrocyte culturing: preparation, properties, and biological activity, JOURNAL OF APPLIED POLYMER SCIENCE, ISSN: 0021-8995, DOI: 10.1002/app.50089, pp.e50089-1-14, 2020

Streszczenie:
An innovative modification of the wet inversion phase method, consisting in the use of a polymer nano‐nonwoven as a nonclassic pore precursor. Mechanical properties of the obtained scaffolds were determined, their hydrophilic properties (serum absorbability) were tested, and the content of residues of materials used in the scaffold preparation was determined. Nontoxicity of the developed scaffolds toward T lymphocyte cells was proved. Cultures of primary chondrocytes were obtained successfully. It was proved that an addition of a polymer nano‐nonwoven changes the properties of the scaffolds favorably in respect of their subsequent application in tissue engineering.

Słowa kluczowe:
cartilage regeneration, chondrocytes, nano-nonwoven, polyvinylpyrrolidone, T lymphocytes

Afiliacje autorów:
Gadomska‐Gajadhur A. - inna afiliacja
Kruk A. - Warsaw University of Technology (PL)
Dulnik J. - IPPT PAN
Chwojnowski A. - Nałęcz Institute of Biocybernetics and Biomedical Engineering, Polish Academy of Sciences (PL)
70p.
4.  Kruk A., Gadomska-Gajadhur A., Rykaczewska I., Dulnik J., Ruśkowski P., Synoradzki L., Influence of liquid pore precursors on morphology and mechanical properties of 3D scaffolds obtained by dry inversion phase method, Journal of Biomedical Materials Research Part B: Applied Biomaterials, ISSN: 1552-4973, DOI: 10.1002/jbm.b.34200, Vol.107, No.4, pp.1079-1087, 2019

Streszczenie:
Polyester 3D scaffolds were obtained by dry inversion phase method. The influence of a polymer and liquid pore precursor type on the 3D scaffolds morphology, porosity and mechanical properties was tested. Polymers and precursors forming a porous structure were identified. It was found that 3D scaffolds having the most preferable structure for cell cultures were obtained from polylactide with the addition of n‐butanol as the liquid pore precursor.

Słowa kluczowe:
liquid pore precursors, mechanical properties, dry inversion phase method, 3D scaffolds

Afiliacje autorów:
Kruk A. - Warsaw University of Technology (PL)
Gadomska-Gajadhur A. - Nałęcz Institute of Biocybernetics and Biomedical Engineering, Polish Academy of Sciences (PL)
Rykaczewska I. - Warsaw University of Technology (PL)
Dulnik J. - IPPT PAN
Ruśkowski P. - Warsaw University of Technology (PL)
Synoradzki L. - Warsaw University of Technology (PL)
140p.
5.  Kruk A., Gadomska-Gajadhur A., Dulnik J., Rykaczewska I., Ruśkowski P., Sebai A., Synoradzki L., Ocena właściwości użytkowych rusztowań komórkowych o strukturze gąbczastej oraz wzrostu na nich fibroblastów, POLIMERY, ISSN: 0032-2725, DOI: 10.14314/polimery.2018.4.3, Vol.63, No.4, pp.18-22, 2018

Streszczenie:
Zbadano wpływ dodatku ciekłych prekursorów porów na morfologię, porowatość i właściwości mechaniczne polilaktydowych rusztowań komórkowych. Rusztowania otrzymano metodą mokrej inwersji faz w wariancie freeze extraction. Oceniono cytotoksyczność wybranych rusztowań w stosunku do fibroblastów mysich oraz ich przydatność do hodowli komórkowych. Wykazano, że dodatek prekursora porów dopolilaktydu korzystnie zmienia morfologię wytworzonych rusztowań, jednocześnie pogarszając ich wytrzymałość mechaniczną. Stwierdzono, że polilaktydowe rusztowania komórkowe z powodzeniem mogą być wykorzystywane do hodowli komórkowych.

Słowa kluczowe:
usztowania komórkowe, polilaktyd, hodowle komórkowe, fibroblasty

Afiliacje autorów:
Kruk A. - Warsaw University of Technology (PL)
Gadomska-Gajadhur A. - Nałęcz Institute of Biocybernetics and Biomedical Engineering, Polish Academy of Sciences (PL)
Dulnik J. - IPPT PAN
Rykaczewska I. - Warsaw University of Technology (PL)
Ruśkowski P. - Warsaw University of Technology (PL)
Sebai A. - Wroclaw University of Science and Technology (PL)
Synoradzki L. - Warsaw University of Technology (PL)
15p.

Prace konferencyjne
1.  Chwojnowski A., Kruk A., Wojciechowski C., Łukowska E., Dulnik J., Sajkiewicz P., The dependence of the membrane structure on the non-woven forming the macropores in the 3D scaffolds preparation, Desalination and Water Treatment, ISSN: 1944-3994, DOI: 10.5004/dwt.2017.11394, Vol.64, pp.324-331, 2017

Streszczenie:
Three types of membrane structures with wide pores were compared in this study. One of the membranes was obtained from polyethersulfone using cellulose fibers as the macropore precursors. Two of the fibers were obtained from poly(L-lactide). As the macropore precursors olyvinylpyrrolidone (1.2 MDa) and pork gelatin non-woven were used, the influence of non-woven fibers on the structure of membranes was shown. Necessity of specific membrane structure application was explained. The hoice of polymers and co-polymers with a range of biodegradation times can determine the scaffold type suitable for the age of a patient.

Słowa kluczowe:
Polysulfone membrane, Polyester membranes, Membrane structures, Biodegradable membranes, 3D scaffold

Afiliacje autorów:
Chwojnowski A. - Nałęcz Institute of Biocybernetics and Biomedical Engineering, Polish Academy of Sciences (PL)
Kruk A. - Warsaw University of Technology (PL)
Wojciechowski C. - inna afiliacja
Łukowska E. - inna afiliacja
Dulnik J. - IPPT PAN
Sajkiewicz P. - IPPT PAN
20p.
2.  Kruk A., Gadomska-Gajadhur A., Ruśkowski P., Chwojnowski A., Dulnik J., Synoradzki L., Preparation of biodegradable semi-permeable membranes as 3D scaffolds for cell cultures, Desalination and Water Treatment, ISSN: 1944-3994, DOI: 10.5004/dwt.2017.11415, Vol.64, pp.317-323, 2017

Streszczenie:
Results of the preparation of semi-permeable membranes made of biodegradable polymers membranes were presented. Among known polyesters, polylactide was selected for research. The membranes were obtained using wet phase inversion method. The influence of polyvinylpyrrolidone and polymeric nano-non-wovens as pores precursors on the structure of obtained membranes was analysed. It was shown, that utilisation of polymeric nano-non-wovens enabled preparation of semi-permeable membranes, which could be used as wide-pore 3D-type cellular scaffolds.

Słowa kluczowe:
Biodegradable polymers membranes, Biodegradable polyesters, Porous three-dimensional scaffolds, Inversion phase method

Afiliacje autorów:
Kruk A. - Warsaw University of Technology (PL)
Gadomska-Gajadhur A. - Nałęcz Institute of Biocybernetics and Biomedical Engineering, Polish Academy of Sciences (PL)
Ruśkowski P. - Warsaw University of Technology (PL)
Chwojnowski A. - Nałęcz Institute of Biocybernetics and Biomedical Engineering, Polish Academy of Sciences (PL)
Dulnik J. - IPPT PAN
Synoradzki L. - Warsaw University of Technology (PL)
20p.

Abstrakty konferencyjne
1.  Chwojnowski A., Kruk A., Wojciechowski C., Łukowska E., Dulnik J., Sajkiewicz P., The dependence of the membrane structure on the non-woven forming the macropores in the 3D scaffolds preparation, MEMPEP 2016, XI-th Conference on Membranes and Membrane Processes in Environmental Protection, 2016-06-15/06-18, Zakopane (PL), pp.23, 2016
2.  Kruk A., Gadomska-Gajadhur A., Ruśkowski P., Chwojnowski A., Dulnik J., Synoradzki L., Preparation of biodegradable semi-permeable membranes as 3D scaffolds for cell cultures, MEMPEP 2016, XI-th Conference on Membranes and Membrane Processes in Environmental Protection, 2016-06-15/06-18, Zakopane (PL), pp.24, 2016

Patenty
Numer/data zgłoszenia patentowego
Ogłoszenie o zgłoszeniu patentowym
Twórcy
Tytuł
Kraj i Nazwa uprawnionego z patentu
Numer patentu
Ogłoszenie o udzieleniu patentu
pdf
414353
2015-10-13
BUP 09/2017
2017-04-24
Chwojnowski A., Łukowska E., Wojciechowski C., Gadomska-Gajadhur A., Kruk A., Ruśkowski P., Synoradzki L., Denis P., Dulnik J., Sajkiewicz P.
Sposób otrzymywania szerokoporowatego, poliestrowego rusztowania komórkowego
PL, Instytut Biocybernetyki i Inżynierii Biomedycznej im. Macieja Nałęcza PAN, Politechnika Warszawska, Instytut Podstawowych Problemów Techniki PAN
228884
WUP 05/2018
2018-05-30



Kategoria A Plus

IPPT PAN

logo ippt            ul. Pawińskiego 5B, 02-106 Warszawa
  +48 22 826 12 81 (centrala)
  +48 22 826 98 15
 

Znajdź nas

mapka
© Instytut Podstawowych Problemów Techniki Polskiej Akademii Nauk 2021