Instytut Podstawowych Problemów Techniki
Polskiej Akademii Nauk

Pracownicy

mgr inż. Kamil Opiela

Zakład Technologii Inteligentnych (ZTI)
stanowisko: doktorant
telefon: (+48) 22 826 12 81 wewn.: 241
pokój: 443
e-mail:


Ostatnie publikacje
1.  Opiela K.C., Zieliński T.G., Dvorák T., Kúdela Jr S., Perforated closed-cell aluminium foam for acoustic absorption, APPLIED ACOUSTICS, ISSN: 0003-682X, DOI: 10.1016/j.apacoust.2020.107706, Vol.174, pp.107706-1-17, 2021

Streszczenie:
Closed-cell metal foams are lightweight and durable materials resistant to high temperature and harsh conditions, but due to their fully closed porosity they are poor airborne sound absorbers. In this paper a classic method of drilling is used for a nearly closed-cell aluminium foam to open its porous interior to the penetration of acoustic waves propagating in air, thereby increasing the wave energy dissipation inside the pores of the perforated medium. The aim is to investigate whether it is possible to effectively approximate wave propagation and attenuation in industrial perforated heterogeneous materials with originally closed porosity of irregular shape by means of their simplified microstructural representation based on computer tomography scans. The applied multi-scale modelling of sound absorption in foam samples is confronted with impedance tube measurements. Moreover, the collected numerical and experimental data is compared with the corresponding results obtained for perforated solid samples to demonstrate a great benefit coming from the presence of an initially closed porous structure in the foam.

Słowa kluczowe:
closed-cell metal foams, perforation, sound absorption, microstructure effects, dissipated powers

Afiliacje autorów:
Opiela K.C. - IPPT PAN
Zieliński T.G. - IPPT PAN
Dvorák T. - Institute of Materials and Machine Mechanics, Slovak Academy of Sciences (SK)
Kúdela Jr S. - Institute of Materials and Machine Mechanics, Slovak Academy of Sciences (SK)
100p.
2.  Opiela K.C., Zieliński T.G., Microstructural design, manufacturing and dual-scale modelling of an adaptable porous composite sound absorber, COMPOSITES PART B-ENGINEERING, ISSN: 1359-8368, DOI: 10.1016/j.compositesb.2020.107833, Vol.187, pp.107833-1-13, 2020

Streszczenie:
This work investigates a porous composite with modifiable micro-geometry so that its ability to absorb noise can be accommodated to different frequency ranges. The polymeric skeleton of the composite has a specific periodic structure with two types of pores (larger and smaller ones) and two types of channels (wide and narrow ones), and each of the large pores contains a small steel ball. Depending on the situation, the balls block different channels that connect the pores, and therefore alter the visco-inertial phenomena between the saturating air and solid skeleton which take place at the micro-scale level and are responsible for the dissipation of the energy of acoustic waves penetrating the porous composite. All this is studied numerically using advanced dual-scale modelling, and the results are verified by the corresponding experimental tests of 3D-printed samples. Particular attention is paid to the prototyping and additive manufacturing of such adaptive porous composites.

Słowa kluczowe:
porous composite, adaptive sound absorber, microstructure-based modelling, additive manufacturing

Afiliacje autorów:
Opiela K.C. - IPPT PAN
Zieliński T.G. - IPPT PAN
200p.
3.  Zieliński T.G., Opiela K.C., Pawłowski P., Dauchez N., Boutin T., Kennedy J., Trimble D., Rice H., Van Damme B., Hannema G., Wróbel R., Kim S., Ghaffari Mosanenzadeh S., Fang N.X., Yang J., Briere de La Hosseraye B., Hornikx M.C.J., Salze E., Galland M.-A., Boonen R., Carvalho de Sousa A., Deckers E., Gaborit M., Groby J.-P., Reproducibility of sound-absorbing periodic porous materials using additive manufacturing technologies: round robin study, Additive Manufacturing, ISSN: 2214-8604, DOI: 10.1016/j.addma.2020.101564, Vol.36, pp.101564-1-24, 2020

Streszczenie:
The purpose of this work is to check if additive manufacturing technologies are suitable for reproducing porous samples designed for sound absorption. The work is an inter-laboratory test, in which the production of samples and their acoustic measurements are carried out independently by different laboratories, sharing only the same geometry codes describing agreed periodic cellular designs. Different additive manufacturing technologies and equipment are used to make samples. Although most of the results obtained from measurements performed on samples with the same cellular design are very close, it is shown that some discrepancies are due to shape and surface imperfections, or microporosity, induced by the manufacturing process. The proposed periodic cellular designs can be easily reproduced and are suitable for further benchmarking of additive manufacturing techniques for rapid prototyping of acoustic materials and metamaterials.

Słowa kluczowe:
porous materials, designed periodicity, additive manufacturing, sound absorption

Afiliacje autorów:
Zieliński T.G. - IPPT PAN
Opiela K.C. - IPPT PAN
Pawłowski P. - IPPT PAN
Dauchez N. - Sorbonne University Alliance (FR)
Boutin T. - Sorbonne University Alliance (FR)
Kennedy J. - Trinity College (IE)
Trimble D. - Trinity College (IE)
Rice H. - Trinity College (IE)
Van Damme B. - inna afiliacja
Hannema G. - inna afiliacja
Wróbel R. - inna afiliacja
Kim S. - inna afiliacja
Ghaffari Mosanenzadeh S. - inna afiliacja
Fang N.X. - inna afiliacja
Yang J. - Clemson University (US)
Briere de La Hosseraye B. - inna afiliacja
Hornikx M.C.J. - inna afiliacja
Salze E. - inna afiliacja
Galland M.-A. - École Centrale de Lyon (FR)
Boonen R. - inna afiliacja
Carvalho de Sousa A. - inna afiliacja
Deckers E. - Katholieke Universiteit Leuven (BE)
Gaborit M. - inna afiliacja
Groby J.-P. - inna afiliacja
200p.

Prace konferencyjne
1.  Opiela K.C., Zieliński T.G., Attenborough K., Manufacturing, modeling, and experimental verification of slitted sound absorbers, ISMA2020 / USD2020, International Conference on Noise and Vibration Engineering / International Conference on Uncertainty in Structural Dynamics, 2020-09-07/09-09, Leuven (BE), pp.409-420, 2020

Streszczenie:
Designs with uniformly distributed slits normal or inclined to the incident surface exhibit a great potential because of their simplicity and good acoustical performance. However, production of materials of this sort is challenging as the required fabrication precision is very high. This paper deals with additive manufacturing, modeling, and impedance tube testing of a few slitted geometries and their variations, including cases where the dividing walls between slits are perforated. They were designed to be producible with current 3D printing technology and provide reliable measurements using standardized equipment. The normal incidence sound absorption curves predicted analytically and numerically were verified experimentally. It is observed that such simple configurations may lead to absorption properties comparable to porous acoustic treatments with more complex microstructure. The good agreement between the predictions and measurements supports the validity of the multi-scale modeling employed.

Afiliacje autorów:
Opiela K.C. - IPPT PAN
Zieliński T.G. - IPPT PAN
Attenborough K. - The Open University (GB)
20p.
2.  Opiela K.C., Zieliński T.G., Dvorák T., Kúdela Jr S., Perforated closed-cell metal foam for acoustic applications, e-FA2020, e-FORUM ACUSTICUM 2020, 2020-12-07/12-11, Lyon (FR), DOI: 10.48465/fa.2020.0925, pp.2879-2886, 2020

Streszczenie:
Despite very good mechanical and physical properties such as lightness, rigidity and high thermal conductivity, closed-porosity metal foams alone are usually poor acoustic treatments. However, relatively low production cost weighs them in many applications in favour of their open-cell equivalents. In the present paper, this attractive and popular material is subject to consideration from the point of view of the improvement of its sound absorption characteristics. A classic method of perforation is proposed to open the porous interior of the medium to the penetration of acoustic waves and therefore enhance the dissipation of their energy. The interaction between the perforation diameter and closed-cell microstructure as well as its impact on the overall sound absorption of a similar foam were already studied in 2010 by Chevillotte, Perrot and Panneton, so these topics are not discussed much in this work. On the other hand, the objective here is to investigate if one can efficiently approximate the wave propagation phenomenon in real perforated heterogeneous materials with closed porosity of irregular shape by means of their simplified three-dimensional representation at the micro-level. The applied multi-scale modelling of sound absorption was confronted with measurements performed in an impedance tube. Moreover, as expected, numerical and experimental comparisons with relevant perforated solid samples show great benefit coming from the presence of a porous structure in the foam, although it was initially closed.

Afiliacje autorów:
Opiela K.C. - IPPT PAN
Zieliński T.G. - IPPT PAN
Dvorák T. - Institute of Materials and Machine Mechanics, Slovak Academy of Sciences (SK)
Kúdela Jr S. - Institute of Materials and Machine Mechanics, Slovak Academy of Sciences (SK)
3.  Zieliński T.G., Opiela K.C., Pawłowski P., Dauchez N., Boutin T., Kennedy J., Trimble D., Rice H., Differences in sound absorption of samples with periodic porosity produced using various Additive Manufacturing Technologies, ICA 2019, 23rd International Congress on Acoustics integrating 4th EAA Euroregio 2019, 2019-09-09/09-13, Aachen (DE), DOI: 10.18154/RWTH-CONV-239456, pp.4505-4512, 2019

Streszczenie:
With a rapid development of modern Additive Manufacturing Technologies it seems inevitable that they will sooner or later serve for production of specific porous and meta-porous acoustic treatments. Moreover, these new technologies are already being used to manufacture original micro-geometric designs of sound absorbing media in order to test microstructure-based effects, models and hypothesis. In the view of these statements, this work reports differences in acoustic absorption measured for porous specimens which were produced from the same CAD-geometry model using several additive manufacturing technologies and 3D-printers. A specific periodic unit cell of open porosity was designed for the purpose. The samples were measured acoustically in the impedance tube and also subjected to a thorough microscopic survey in order to check their quality and look for the discrepancy reasons.

Słowa kluczowe:
Sound absorption, Additive Manufacturing Technologies

Afiliacje autorów:
Zieliński T.G. - IPPT PAN
Opiela K.C. - IPPT PAN
Pawłowski P. - IPPT PAN
Dauchez N. - Sorbonne University Alliance (FR)
Boutin T. - Sorbonne University Alliance (FR)
Kennedy J. - Trinity College (IE)
Trimble D. - Trinity College (IE)
Rice H. - Trinity College (IE)
4.  Opiela K.C., Zieliński T.G., Adaptation of the equivalent-fluid model to the additively manufactured acoustic porous materials, ICA 2019, 23rd International Congress on Acoustics integrating 4th EAA Euroregio 2019, 2019-09-09/09-13, Aachen (DE), DOI: 10.18154/RWTH-CONV-239799, pp.1216-1223, 2019

Streszczenie:
Recent investigations show that the normal incidence sound absorption in 3D-printed rigid porous materials is eminently underestimated by numerical calculations using standard models. In this paper a universal amendment to the existing mathematical description of thermal dispersion and fluid flow inside rigid foams is proposed which takes account of the impact of the additive manufacturing technology on the acoustic properties of produced samples. The porous material with a motionless skeleton is conceptually substituted by an equivalent fluid with effective properties evaluated from the Johnson-Champoux-Allard-Pride-Lafarge model. The required macroscopic transport parameters are computed from the microstructural solutions using the hybrid approach. A cross-functional examination of the quality (shape consistency, representative surface roughness, etc.) of two periodic specimens obtained from additive manufacturing processes is additionally performed in order to link it to the results of the multiscale acoustic modelling. Based on this study, some of the transport parameters are changed depending on certain quantities reflecting the actual quality of a fabricated material. The developed correction has a considerable influence on the predicted value of the sound absorption coefficient such that the original discrepancies between experimental and numerical curves are significantly diminished.

Słowa kluczowe:
Rigid porous material, Additive manufacturing, Sound absorption

Afiliacje autorów:
Opiela K.C. - IPPT PAN
Zieliński T.G. - IPPT PAN
5.  Opiela K.C., Rak M., Zieliński T.G., A concept demonstrator of adaptive sound absorber/insulator involving microstructure-based modelling and 3D-printing, ISMA 2018 / USD 2018, International Conference on Noise and Vibration Engineering / International Conference on Uncertainty in Structural Dynamics, 2018-09-17/09-19, Leuven (BE), pp.1091-1103, 2018

Streszczenie:
The purpose of this work is to present and investigate the concept of adaptive sound absorbers, that is, periodic porous media with modifiable micro-geometry, so that their ability of sound absorption or insulation can be changed in various frequency ranges. To demonstrate this concept, a simple periodic porous micro-geometry with small bearing balls inside pores is proposed. By a simple positioning of the periodic porous sample the gravity force is used for the small balls to close some of the windows linking the pores, changing in that way the flow path inside pores, which entails significant modifications of the relevant parameters of permeability and tortuosity. Also the viscous characteristic length is changed, while the porosity as well as the thermal characteristic length remain unchanged. Nevertheless, such significant changes of some crucial transport parameters strongly affect the overall acoustic wave propagation in the porous medium. All this is studied using an advanced dual-scale modelling as well as experimental testing of 3D-printed specimens.

Afiliacje autorów:
Opiela K.C. - IPPT PAN
Rak M. - inna afiliacja
Zieliński T.G. - IPPT PAN
20p.

Abstrakty konferencyjne
1.  Zieliński T.G., Opiela K.C., Multiscale and multiphysics modelling of an adaptive material for sound absorption, COMSOL CONFERENCE, 2018-10-22/10-24, Lausanne (CH), pp.1-2, 2018
2.  Zieliński T.G., Jankowski Ł., Opiela K.C., Deckers E., Modelling of poroelastic media with localised mass inclusions, SAPEM'2017, SAPEM'2017 - 5th Symposium on the Acoustics of Poro-Elastic Materials, 2017-12-06/12-08, Le Mans (FR), pp.1-2, 2017

Kategoria A Plus

IPPT PAN

logo ippt            ul. Pawińskiego 5B, 02-106 Warszawa
  +48 22 826 12 81 (centrala)
  +48 22 826 98 15
 

Znajdź nas

mapka
© Instytut Podstawowych Problemów Techniki Polskiej Akademii Nauk 2021