Instytut Podstawowych Problemów Techniki
Polskiej Akademii Nauk

Pracownicy

prof. dr hab. inż. Józef Miastkowski


Doktorat
1967 Wpływ historii obciążenia na powierzchnię plastyczności 
promotor -- doc. dr hab. Wojciech Szczepiński, IPPT PAN
 
Habilitacja
1974 Kryteria plastycznego płynięcia i hipotezy wzmocnienia metali w świetle badań doświadczalnych 
Profesura
1986 Nadanie tytułu naukowego profesora
Promotor prac doktorskich
1.  1990 Szczebiot Ryszard   Analiza wzmocnienia stopu aluminium odkształconego plastyczne w warunkach złożonego stanu naprężenia 
2.  1983 Skrocki Henryk   Pamięć materiału przy obciążeniach wymuszających obrót powierzchni plastyczności 

Ostatnie publikacje
1.  Szczepiński W., Miastkowski J., On Experimental Studies of Yield Surfaces of Metals; a more general approach, Prace IPPT - IFTR Reports, ISSN: 2299-3657, No.42, pp.1-29, 1993
2.  Miastkowski J., Szczebiot R., Analiza nośności granicznej elementów o przekroju kwadratowym z szeregiem wycięć o profilu prostokątnym, Prace IPPT - IFTR Reports, ISSN: 2299-3657, No.38, pp.1-36, 1993
3.  Miastkowski J., Skrocki H., Analiza wytrzymałościowa udarowo rozciąganych osiowo-symetrycznych elementów konstrukcji z karbami prostokątnymi, Prace IPPT - IFTR Reports, ISSN: 2299-3657, No.12, pp.1-23, 1993
4.  Miastkowski J., Skrocki H., Analiza wytrzymałościowa udarowo rozciąganych płaskich elementów z karbami kątowymi, Prace IPPT - IFTR Reports, ISSN: 2299-3657, No.32, pp.1-16, 1989
5.  Miastkowski J., Szczebiot R., Nośność graniczna prętów o przekroju kwadratowym z szeregiem karbów kołowych, Prace IPPT - IFTR Reports, ISSN: 2299-3657, No.55, pp.1-30, 1988
6.  Miastkowski J., Szczepiński W., Doświadczalna analiza powierzchni wpływu plastycznego odkształcenia na wytrzymałość zmęczeniową metali, Prace IPPT - IFTR Reports, ISSN: 2299-3657, No.6, pp.1-14, 1980
7.  Miastkowski J., Własności mechaniczne materiału odkształconego plastycznie przy złożonych wielokrotnych obciążeniach, Prace IPPT - IFTR Reports, ISSN: 2299-3657, No.53, pp.1-13, 1976
8.  Miastkowski J., Mechaniczne własności materiałów przy rozciąganiu i ściskaniu, Prace IPPT - IFTR Reports, ISSN: 2299-3657, No.43, pp.1-104, 1976
9.  Miastkowski J., Kryteria plastycznego płynięcia i hipotezy wzmocnienia metali w świetle badań doświadczalnych (Praca habilitacyjna), Prace IPPT - IFTR Reports, ISSN: 2299-3657, No.41, pp.1-251, 1973
10.  Miastkowski J., Doświadczalne badania efektu pamięci wstępnie odkształconego materiału, Prace IPPT - IFTR Reports, ISSN: 2299-3657, No.62, pp.1-15, 1972
11.  Szczepiński W., Miastkowski J., Plastic straining of notched bars with intermediate thickness and small shoulder ratio, INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, ISSN: 0020-7462, DOI: 10.1016/0020-7462(68)90026-7, Vol.3, No.1, pp.83-97, 1968

Streszczenie:
Upper bounds on the yield point load factor for notched bars with finite thickness and small shoulder ratio c/h, are presented and later compared with experimental results. Five sets of specimens of aluminium alloys were tested. It was found that the yield point load generally coincides with the theoretical upper bound, although the influence of the notch geometry and ductility of the material can be observed.

Afiliacje autorów:
Szczepiński W. - IPPT PAN
Miastkowski J. - IPPT PAN
12.  Szczepiński W., Miastkowski J., An experimental study of the effect of the prestraining history on the yield surfaces of an aluminium alloy, JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, ISSN: 0022-5096, DOI: 10.1016/0022-5096(68)90024-0, Vol.16, No.3, pp.153-162, 1968

Streszczenie:
Experimental results for fifty-six specimens of an aluminium alloy are presented in a study of the effect of the prestraining path on the shape of the yield surfaces. A special experimental technique has been applied, consisting of cutting out flat specimens from the prestrained sheet material. Experimental results show that if two various loading paths have different initial sectors and a common final sector, the influence of these initial sectors on the yield surface is the smaller the longer is the final common sector. A theoretical analysis of that problem on the basis of the kinematic workhardening rule is also presented.

Afiliacje autorów:
Szczepiński W. - IPPT PAN
Miastkowski J. - IPPT PAN
13.  Szczepiński W., Miastkowski J., Plastic Straining of Notched Bars with Intermediate Thickness and Small Shoulder Ratio, Prace IPPT - IFTR Reports, ISSN: 2299-3657, No.4, pp.1-15, 1967
14.  Szczepiński W., Dietrich L., Drescher E., Miastkowski J., Plastic flow of axially-symmetric notched bars pulled in tension, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, ISSN: 0020-7683, DOI: 10.1016/0020-7683(66)90037-0, Vol.2, No.4, pp.543-554, 1966

Streszczenie:
Theoretical and experimental results are presented for plastic flow of axially symmetric notched bars. The slip-line fields have been calculated numerically using the Shield theory of axially symmetric plastic flow. The load factors obtained from the theoretical solutions differ only slightly from those for plane strain conditions. Two sets of specimens were investigated in order to obtain the actual load factors for V-shaped and rounded notches. The agreement between the theory and experimental results is satisfactory. In the last series of experiments the influence of the diameter of the bar outside the notch was investigated and later compared with the theoretically estimated value of that diameter.

Afiliacje autorów:
Szczepiński W. - IPPT PAN
Dietrich L. - IPPT PAN
Drescher E. - inna afiliacja
Miastkowski J. - IPPT PAN
15.  Miastkowski J., Szczepiński W., An experimental study of yield surfaces of prestrained brass, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, ISSN: 0020-7683, DOI: 10.1016/0020-7683(65)90026-0, Vol.1, No.2, pp.189-194, 1965

Streszczenie:
Experimental results for twenty-eight tubular specimens of a M-63 brass, subjected to combined biaxial tension, are presented in the study of the effect of prestraining on the shape of the yield surface. Yield surfaces are found for various definitions of the yield locus. The strain increments are also shown in the stress plane in order to compare their orientation with the normality criterion. Moreover, the lengths of elastic and plastic strain increment vectors are compared at different moments of loading.

Afiliacje autorów:
Miastkowski J. - IPPT PAN
Szczepiński W. - IPPT PAN
16.  Miastkowski J., Szczepiński W., Doświadczalne badanie powierzchni plastyczności wstępnie odkształconego mosiądzu, JOURNAL OF THEORETICAL AND APPLIED MECHANICS, ISSN: 1429-2955, Vol.3, No.2, pp.55-66, 1965

Streszczenie:
Experimental results for twenty-eight tubular specimens of a M63 brass, subjected to combined biaxial tension are presented in the study of the effect of prestraining on the shape of the yield surface. Yield surfaces are found for various definitions of the yield locus. The strain increments are also shown in the stress plane in order to compare their orientation with the normality criterion. Moreover, the lengths of elastic and plastic strain increment vectors are compared at different moments of loading.

Afiliacje autorów:
Miastkowski J. - IPPT PAN
Szczepiński W. - IPPT PAN

Kategoria A Plus

IPPT PAN

logo ippt            ul. Pawińskiego 5B, 02-106 Warszawa
  +48 22 826 12 81 (centrala)
  +48 22 826 98 15
 

Znajdź nas

mapka
© Instytut Podstawowych Problemów Techniki Polskiej Akademii Nauk 2024