Instytut Podstawowych Problemów Techniki
Polskiej Akademii Nauk

Pracownicy

dr Mohsen Rezaee Hajidehi

Zakład Mechaniki Materiałów (ZMM)
Zespół Modelowania Materiałów (ZeMM)
stanowisko: adiunkt
telefon: (+48) 22 826 12 81 wewn.: 401
pokój: 236
e-mail:

Doktorat
2018-02-15 Nonlinear analysis of reinforced concrete frames: safety evaluation and retrofitting techniques 
promotor -- prof. dr Giuseppe Giambanco, UDSDP
promotor pomocniczy -- prof. dr hab. inż. Stanisław Stupkiewicz, IPPT PAN
 

Ostatnie publikacje
1.  Tůma K., Rezaee Hajidehi M., Hron J., Farrell P.E., Stupkiewicz S., Phase-field modeling of multivariant martensitic transformation at finite-strain: computational aspects and large-scale finite-element simulations, COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, ISSN: 0045-7825, DOI: 10.1016/j.cma.2021.113705, Vol.377, pp.113705-1-23, 2021

Streszczenie:
Large-scale 3D martensitic microstructure evolution problems are studied using a finite-element discretization of a finite-strain phase-field model. The model admits an arbitrary crystallography of transformation and arbitrary elastic anisotropy of the phases, and incorporates Hencky-type elasticity, a penalty-regularized double-obstacle potential, and viscous dissipation. The finite-element discretization of the model is performed in Firedrake and relies on the PETSc solver library. The large systems of linear equations arising are efficiently solved using GMRES and a geometric multigrid preconditioner with a carefully chosen relaxation. The modeling capabilities are illustrated through a 3D simulation of the microstructure evolution in a pseudoelastic CuAlNi single crystal during nano-indentation, with all six orthorhombic martensite variants taken into account. Robustness and a good parallel scaling performance have been demonstrated, with the problem size reaching 150 million degrees of freedom.

Słowa kluczowe:
phase-field method, finite-element method, large-scale simulations, shape memory alloys, nano-indentation

Afiliacje autorów:
Tůma K. - IPPT PAN
Rezaee Hajidehi M. - IPPT PAN
Hron J. - Charles University in Prague (CZ)
Farrell P.E. - inna afiliacja
Stupkiewicz S. - IPPT PAN
200p.
2.  Rezaee Hajidehi M., Stupkiewicz S., Modelling of propagating instabilities in pseudoelastic NiTi tubes under combined tension–torsion: helical bands and apparent yield locus, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, ISSN: 0020-7683, DOI: 10.1016/j.ijsolstr.2020.09.011, Vol.221, pp.130-149, 2021

Streszczenie:
This paper is concerned with modelling of propagating instabilities and transformation patterns in NiTi tubes subjected to combined tension–torsion loading. A recently developed gradient-enhanced finite-strain model of pseudoelasticity is employed for this purpose, and respective finite-element computations are carried out. It is shown that the model is capable of representing a number of experimentally observed effects. The major effect, which has not been successfully modelled to date, is that the transformation is inhomogeneous under tension-dominated loading and alters towards a homogeneous transformation as the level of torsion is increased. To capture this effect, the model must deliver a non-monotonic (up-down-up) stress–strain response in tension and a monotonic one in torsion, and this can be achieved if the model includes three features: tension–compression asymmetry, transverse isotropy of the transformation strain, and deformation-dependent hardening/softening response. A detailed study is also carried out regarding the transformation yield locus. The results reveal an ambiguity in determination of the yield locus for tension-dominated loading and hence an ambiguity in determination of the tension–compression asymmetry. This aspect seems to have been overlooked in the literature despite its impact on correct interpretation of experimental results.

Słowa kluczowe:
shape memory alloys, phase transformation, strain localization, finite-element method

Afiliacje autorów:
Rezaee Hajidehi M. - IPPT PAN
Stupkiewicz S. - IPPT PAN
140p.
3.  Stupkiewicz S., Rezaee-Hajidehi M., Petryk H., Multiscale analysis of the effect of interfacial energy on non-monotonic stress–strain response in shape memory alloys, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, ISSN: 0020-7683, DOI: 10.1016/j.ijsolstr.2020.04.006, Vol.221, pp.77-91, 2021

Streszczenie:
The effect of formation and evolution of stress-induced martensitic microstructures on macroscopic mechanical properties of shape memory alloys in the pseudoelastic regime is investigated with account for size-dependent energy of interfaces. A quantitative relationship is established between the changes in free energy and dissipation on the interfaces at three microstructural scales and the overall mechanical characteristic of the material under tensile loading. The multiscale analysis carried out for a polycrystalline NiTi shape memory alloy has revealed that the interfacial energy storage and dissipation can strongly affect the shape and width of the stress–strain hysteresis loop. The predicted non-monotonic stress–strain response for the material of a selected grain size shows a remarkable similarity to the experimental one extracted from a tensile test of a laminate by Hallai and Kyriakides (2013). By the classical Maxwell construction, the non-monotonic response for a material element results in a commonly observed stress plateau for a tensile specimen, which is associated with the propagation of phase transformation fronts. This behaviour is confirmed with striking accuracy by 3D finite-element computations performed for a macroscopic tensile specimen, in which propagating instability bands are treated explicitly.

Słowa kluczowe:
microstructures, martensitic transformation, size effects, incremental energy minimization, propagating instabilities

Afiliacje autorów:
Stupkiewicz S. - IPPT PAN
Rezaee-Hajidehi M. - IPPT PAN
Petryk H. - IPPT PAN
140p.
4.  Rezaee-Hajidehi M., Stupkiewicz S., Micromorphic approach to phase-field modeling of multivariant martensitic transformation with rate-independent dissipation effects, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, ISSN: 0020-7683, DOI: 10.1016/j.ijsolstr.2021.03.014, Vol.222-223, pp.111027-1-18, 2021

Streszczenie:
A micromorphic formulation of the phase-field model of martensitic transformation is developed within the incremental energy minimization framework. In contrast to the conventional phase-field formulation, the order parameters are viewed as local variables and the corresponding evolution equations are solved at the material-point level, i.e. at the Gauss points in the finite-element setting. From a computational standpoint, such a treatment is advantageous for complex evolution laws that may lead to computational difficulties if treated globally, as in the conventional phase-field formulation. In the micromorphic formulation, each order parameter is coupled to its micromorphic counterpart governed by a global Helmholtz-type PDE. This coupling ensures that the interfacial energy and related size effects are correctly captured by the model. In this work, the micromorphic approach is applied to a finite-strain multivariant phase-field model that incorporates rate-independent dissipation. The augmented Lagrangian technique is then used to transform the resulting non-smooth incremental minimization problem to a smooth and unconstrained saddle-point problem. Microstructure evolution under nano-indentation is studied to illustrate the approach.

Słowa kluczowe:
phase-field method, micromorphic approach, rate-independent dissipation, incremental energy minimization, microstructure, shape-memory alloys

Afiliacje autorów:
Rezaee-Hajidehi M. - IPPT PAN
Stupkiewicz S. - IPPT PAN
140p.
5.  Rezaee Hajidehi M., Tůma K., Stupkiewicz S., Gradient-enhanced thermomechanical 3D model for simulation of transformation patterns in pseudoelastic shape memory alloys, International Journal of Plasticity, ISSN: 0749-6419, DOI: 10.1016/j.ijplas.2019.08.014, Vol.128, pp.102589-1-29, 2020

Streszczenie:
Stress-induced martensitic transformation in polycrystalline NiTi under tension often proceeds through formation and propagation of macroscopic phase transformation fronts, i.e., diffuse interfaces that separate the transformed and untransformed domains. A gradient-enhanced 3D finite-strain model of pseudoelasticity is developed in this work with the aim to describe the related phenomena. The underlying softening response is regularized by enhancing the Helmholtz free energy of a non-gradient model with a gradient term expressed in terms of the martensite volume fraction. To facilitate finite-element implementation, a micromorphic-type regularization is then introduced following the approach developed recently in the 1D small-strain context. The complete evolution problem is formulated within the incremental energy minimization framework, and the resulting non-smooth minimization problem is solved by employing the augmented Lagrangian technique. In order to account for the thermomechanical coupling effects, a general thermomechanical framework, which is consistent with the second law of thermodynamics and considers all related couplings, is also developed. Finite-element simulations of representative 3D problems show that the model is capable of representing the loading-rate effects in a NiTi dog-bone specimen and complex transformation patterns in a NiTi tube under tension. A parametric study is also carried out to investigate the effect of various parameters on the characteristics of the macroscopic transformation front.

Słowa kluczowe:
phase transformation, softening, strain localization, micromorphic regularization, finite-element method

Afiliacje autorów:
Rezaee Hajidehi M. - IPPT PAN
Tůma K. - inna afiliacja
Stupkiewicz S. - IPPT PAN
200p.
6.  Rezaee-Hajidehi M., Tůma K., Stupkiewicz S., A note on Padé approximants of tensor logarithm with application to Hencky-type hyperelasticity, COMPUTATIONAL MECHANICS, ISSN: 0178-7675, DOI: 10.1007/s00466-020-01915-0, pp.1-14, 2020

Streszczenie:
We show that the logarithmic (Hencky) strain and its derivatives can be approximated, in a straightforward manner and with a high accuracy, using Padé approximants of the tensor (matrix) logarithm. Accuracy and computational efficiency of the Padé approximants are favourably compared to an alternative approximation method employing the truncated Taylor series. As an application, Hencky-type hyperelasticity models are considered, in which the elastic strain energy is expressed in terms of the Hencky strain, and of our particular interest is the anisotropic energy quadratic in the Hencky strain. Finite-element computations are carried out to examine performance of the Padé approximants of tensor logarithm in Hencky-type hyperelasticity problems. A discussion is also provided on computation of the stress tensor conjugate to the Hencky strain in a general anisotropic case.

Słowa kluczowe:
logarithmic strain, Padé approximation method, hyperelasticity, anisotropy, finite-element method

Afiliacje autorów:
Rezaee-Hajidehi M. - IPPT PAN
Tůma K. - inna afiliacja
Stupkiewicz S. - IPPT PAN
100p.
7.  Rezaee Hajidehi M., Stupkiewicz S., Phase-field modeling of multivariant martensitic microstructures and size effects in nano-indentation, MECHANICS OF MATERIALS, ISSN: 0167-6636, DOI: 10.1016/j.mechmat.2019.103267, Vol.141, pp.103267-1-14, 2020

Streszczenie:
A finite-strain phase-field model is developed for the analysis of multivariant martensitic transformation during nano-indentation. Variational formulation of the complete evolution problem is developed within the incremental energy minimization framework. Computer implementation is performed based on the finite-element method which allows a natural treatment of the finite-strain formulation and of the contact interactions. A detailed computational study of nano-indentation reveals several interesting effects including the pop-in effect associated with nucleation of martensite and the energy-lowering breakdown of the symmetry of microstructure. The effect of the indenter radius is also examined revealing significant size effects governed by the interfacial energy.

Słowa kluczowe:
phase-field method, microstructure, shape-memory alloys, nano-indentation, size effects

Afiliacje autorów:
Rezaee Hajidehi M. - IPPT PAN
Stupkiewicz S. - IPPT PAN
100p.
8.  Minafò G., Rezaee Hajidehi M., Giambanco G., A mechanical approach for evaluating the distribution of confinement pressure in FRP-wrapped rectangular columns, JOURNAL OF ENGINEERING MECHANICS-ASCE, ISSN: 0733-9399, DOI: 10.1061/(ASCE)EM.1943-7889.0001673, Vol.145, No.12, pp.04019092-1-9, 2019

Streszczenie:
In recent decades, fiber reinforced polymer (FRP) wrapping has become a common technique to retrofit reinforced concrete (RC) columns. Numerous research works have sought to verify analytically and experimentally its effectiveness in terms of enhancement of axial load bearing capacity and ductility. These studies highlighted that in the case of sharp-cornered sections, the maximum allowable confinement pressure is limited by premature failure at corners and, consequently, stress in the FRP, as well as the distribution of the confinement pressure, is not uniform. The prediction of this phenomenon is not straightforward, and existing theoretical studies propose complex numerical simulations, whereas technical codes provide simplified or empirical relationships for its assessment. This paper presents an analytical model for the evaluation of the effective distribution of confinement pressure in FRP confined concrete members with rounded corners. The model allows considering the interaction with the concrete core and different brittle failure modes, including FRP rupture and debonding. It leads to determining the distribution of the confinement pressure along the section. Results are compared with those achieved by finite-element (FE) analyses and with numerical and experimental data available in the literature. Good agreement is obtained in all cases, showing the reliability of the proposed model.

Słowa kluczowe:
fiber reinforced polymer (FRP) wrapping, corner radius, confinement pressure, brittle failure

Afiliacje autorów:
Minafò G. - University of Palermo (IT)
Rezaee Hajidehi M. - IPPT PAN
Giambanco G. - University of Palermo (IT)
100p.
9.  Rezaee Hajidehi M., Stupkiewicz S., Gradient-enhanced model and its micromorphic regularization for simulation of Lüders-like bands in shape memory alloys, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, ISSN: 0020-7683, DOI: 10.1016/j.ijsolstr.2017.11.021, Vol.135, pp.208-218, 2018

Streszczenie:
Shape memory alloys, notably NiTi, often exhibit softening pseudoelastic response that results in formation and propagation of Lüders-like bands upon loading, for instance, in uniaxial tension. A common approach to modelling softening and strain localization is to resort to gradient-enhanced formulations that are capable of restoring well-posedness of the boundary-value problem. This approach is also followed in the present paper by introducing a gradient-enhancement into a simple one-dimensional model of pseudoelasticity. In order to facilitate computational treatment, a micromorphic-type regularization of the gradient-enhanced model is subsequently performed. The formulation employs the incremental energy minimization framework that is combined with the augmented Lagrangian treatment of the resulting non-smooth minimization problem. A thermomechanically coupled model is also formulated and implemented in a finite-element code. The effect of the loading rate on the localization pattern in a NiTi wire under tension is studied, and the features predicted by the model show a good agreement with the experimental observations. Aditionally, an analytical solution is provided for a propagating interface (macroscopic transformation front) both for the gradient-enhanced model and for its micromorphic version

Słowa kluczowe:
martensite, phase transformation, micromorphic model, strain localization, thermomechanical coupling

Afiliacje autorów:
Rezaee Hajidehi M. - inna afiliacja
Stupkiewicz S. - IPPT PAN
40p.
10.  Ribolla E.M., Rezaee Hajidehi M., Rizzo P., Scimemi G.F., Spada A., Giambanco G., Ultrasonic inspection for the detection of debonding in CFRP-reinforced concrete, Structure and Infrastructure Engineering, ISSN: 1573-2479, DOI: 10.1080/15732479.2017.1384843, Vol.14, No.6, pp.807-816, 2018

Streszczenie:
Fibre-reinforced plastic (FRP) composites are extensively used to retrofit civil structures. However, the quality and the characteristics of the bond between the FRP and the structure are critical to ensure the efficacy of the retrofit. For this reason, effective non-destructive evaluation (NDE) methods are often necessary to assess the bonding conditions. This article presents an ultrasonic technique for detecting defects at the FRP-substrate interface. The technique uses the Akaike Information Criterion, to detect automatically the onset of the ultrasonic signals, and the novel Equivalent Time Lenght (ETL) parameter, to quantify the energy of the propagating ultrasonic signals along the interface between FRP and concrete. The uniqueness of the ETL is that it is not affected by the coupling conditions between the ultrasonic probes and the structure. The proposed NDE technique has been tested numerically by performing 2D Finite-Element analysis and experimentally on reinforced concrete samples. The results show that the method is robust and cost-effective.

Słowa kluczowe:
CFRP, fibre-reinforced materials, concrete, bonding, non-destructive testing, ultrasonic methods, equivalent time length

Afiliacje autorów:
Ribolla E.M. - University of Palermo (IT)
Rezaee Hajidehi M. - inna afiliacja
Rizzo P. - University of Pittsburgh (US)
Scimemi G.F. - University of Palermo (IT)
Spada A. - University of Palermo (IT)
Giambanco G. - University of Palermo (IT)
40p.
11.  Rezaee Hajidehi M., Spada A., Giambanco G., The multiple slope discontinuity beam element for nonlinear analysis of RC framed structures, MECCANICA, ISSN: 0025-6455, DOI: 10.1007/s11012-018-0817-3, Vol.53, No.6, pp.1469-1490, 2018

Streszczenie:
The seismic nonlinear response of reinforced concrete structures permits to identify critical zones of an existing structure and to better plan its rehabilitation process. It is obtained by performing finite element analysis using numerical models classifiable into two categories: lumped plasticity models and distributed plasticity models. The present work is devoted to the implementation, in a finite element environment, of an elastoplastic Euler–Bernoulli beam element showing possible slope discontinuities at any position along the beam span, in the framework of a modified lumped plasticity. The differential equation of an Euler–Bernoulli beam element under static loads in presence of multiple discontinuities in the slope function was already solved by Biondi and Caddemi (Int J Solids Struct 42(9):3027–3044, 2005, Eur J Mech A Solids 26(5):789–809, 2007), who also found solutions in closed form. These solutions are now implemented in the new beam element respecting a thermodynamical approach, from which the state equations and flow rules are derived. State equations and flow rules are rewritten in a discrete manner to match up with the Newton–Raphson iterative solutions of the discretized loading process. A classic elastic predictor phase is followed by a plastic corrector phase in the case of activation of the inelastic phenomenon. The corrector phase is based on the evaluation of return bending moments by employing the closest point projection method under the hypothesis of associated plasticity in the bending moment planes of a Bresler’s type activation domain. Shape functions and stiffness matrix for the new element are derived. Numerical examples are furnished to validate the proposed beam element.

Słowa kluczowe:
Slope discontinuity, Nonlinear pushover analysis, Lumped plasticity, Plastic hinge

Afiliacje autorów:
Rezaee Hajidehi M. - inna afiliacja
Spada A. - University of Palermo (IT)
Giambanco G. - University of Palermo (IT)
30p.
12.  Spada A., Rezaee Hajidehi M., Giambanco G., A BEAM ELEMENT ALLOWING MULTIPLE SLOPE DISCONTINUITIES FOR RC STRUCTURES: AN APPLICATION, JOURNAL OF EARTHQUAKE ENGINEERING, ISSN: 1363-2469, Vol.XXXV, No.1, pp.131-150, 2018

Streszczenie:
A beam/column element allowing the formation of multiple plastic hinges in columns or beams of a reinforced concrete (RC) framed structure is used in this work to show, through an application, its advantages with respect to conventional lumped plasticity models. Slope discontinuities can be located at any position of an Euler-Bernoulli beam span and not at the two extremes only. The model is in fact written in the framework of a modified lumped plasticity theory, and respectful of a thermodynamic approach. Flow rules and state equations are derived invoking the Theorem of maximum dissipation and using a Bresler’s type activation domain. The beam element has already been implemented in a researchoriented code to run nonlinear analyses on 2-D frames. The discretized loading process is separated, at each step, in two phases: a predictor and a corrector phase. Numerical examples highlight how the new finite element permits to run nonlinear analyses avoiding a mesh refinement.

Słowa kluczowe:
beam element, plastic hinge, lumped plasticity, slope discontinuity, nonlinear FEM analysis

Afiliacje autorów:
Spada A. - University of Palermo (IT)
Rezaee Hajidehi M. - inna afiliacja
Giambanco G. - University of Palermo (IT)
25p.

Kategoria A Plus

IPPT PAN

logo ippt            ul. Pawińskiego 5B, 02-106 Warszawa
  +48 22 826 12 81 (centrala)
  +48 22 826 98 15
 

Znajdź nas

mapka
© Instytut Podstawowych Problemów Techniki Polskiej Akademii Nauk 2021